Daikin FWXT20AATV3CL — правильное подключение гидравлических линий для систем водоснабжения [16/40]

2.7

FWXT U.M. 10ATV3 15ATV3 20ATV3

mm 14 16 18

Hydraulic connections

The engineer is responsible for choosing the right water

lines and their size, in accordance with good installation

practices and the applicable laws, keeping in mind that

under-sized pipelines lead to poor system operation.

To make the connections:

- position the water lines

- tighten the connections using the "wrench against

wrench" method

- check for any fluid loss

- apply a lining to the connections (use proper insulating

material)

The hydraulic lines and fittings must be thermally insulated.

Avoid partial insulation of the pipes.

Avoid over-tightening the pipes to avoid damage to the

insulation.

To ensure water tightness of the threaded connections,

use hemp and green paste; the use of teflon tape is

recommended if you have poured anti-freeze liquid in the

water circuit.

Carefully check that the insulation is tight, in order to

prevent the formation and dripping of condensate.

Note: Always provide an electrically controlled valve

on the machine or upstream that interrupts the water

flow when the setpoint is reached.

Pipeline diameter