Comet FDX Blade XL PRO 9.16 16/200 G Honda GX270 ZWD [23/180] Operation with detergent

Comet FDX Blade XL PRO 13.15 15/280 G Loncin G390F FW2 [23/180] Operation with detergent
23
Take the high pressure cleaner to the place of work using the handle(4).
Engage the parking brake(41) (FDX ENDURANCE).
Unwind the high pressure hose completely(30).
Connect a gardening type quickt coupling (FDX BLADE XL) to the water inlet hose-end tting(11)
or, exploiting the clamp(12) supplied, x a supply hose with an inside diameter of 19mm/0,75in.
OperationG in Fig.7.
Start the engine, referring to the relevant operating and maintenance manual.
Open the water supply tap (if connected to the drinking water mains it is mandatory to use a back-ow
preventer: to use this device refer to the relevant instruction manual), making sure there are no drips.
Alternatively, put a suction hose in a tank.
Press the spray gun lever(33) and wait for a continuous jet of water to come through which means
the pump is priming correctly.
Stop the engine, referring to the relevant operating and maintenance manual, and close the water
supply tap, if any.
Press the spray gun lever(33) to discharge all residual pressure.
Connect the lance hose(21) to the spray gun (19) depending on the type of high pressure cleaner you
have. OperationH in Fig.7.
STANDARD OPERATION (HIGH PRESSURE)
Ensure that the nozzle holder head(24) is not in the detergent dispensing position (see also the
operation with detergent
paragraph).
Start the engine, referring to the relevant operating and maintenance manual.
Open the water supply tap, if any.
Press the spray gun lever(33) checking that the nozzle spray is uniform and there are no drips.
If necessary regulate the pressure by way of the pressure regulating knob(17). Turn it clockwise to
increase pressure, anticlockwise to reduce it. You can see the pressure on the pressure indicator(18).
CAUTION
Before expecting maximum performance of the high pressure cleaner it is good practice to warm
the engine up for a couple of minutes.
OPERATION WITH DETERGENT
The recommended detergents are more than 90% biodegradable. On how to use the detergent please
refer to the instructions given on the detergent label.
FDX BLAD XL/PRO
In the case of suctioning from the high power cleaner’s tank (25), remove the cap (26) and, being careful
not to spill any liquid (maximum capacity is 3.5 l/0.92 US gal), ll the tank with the solution wanted.
FDX ENDURANCE
Put the hose(31) in the external tank which has already been prepared with detergent to the strength
required: in this case too, follow the indications given for the dosage on the detergent pack label.
Turn the nozzle holder head(24) as schematized in Fig.7-a and then operate the spray gun lever (33)
and start dispensing detergent.
Release the lever(33) and turn the nozzle holder head (24) as schematized in Fig.7-b to stop dispensing
detergent and return to high pressure operation.
STOPPING OPERATION
When the spray gun lever(33) is released it stops the high pressure jet and the machine goes to the
bypass mode.
Pressing the spray gun lever(33) again the high pressure jet starts again.
EN

Содержание

Take the high pressure cleanerto the place of work using the handle 4 Engage the parking brake 41 FDX ENDURANCE Unwind the high pressure hose completely 30 Connect a gardening type quickfit coupling FDX BLADE XL to the water inlet hose end fitting 11 n or exploiting the clamp 12 supplied fix a supply hose with an inside diameter of 19 mm 0 75 in 14 Operation G in Fig 7 Start the engine referring to the relevant operating and maintenance manual Open the water supply tap if connected to the drinking water mains it is mandatory to use a back flow preventer to use this device refer to the relevant instruction manual making sure there are no drips Alternatively put a suction hose in a tank Press the spray gun lever 33 and wait for a continuous jet of water to come through which means the pump is priming correctly Stop the engine referring to the relevant operating and maintenance manual and close the water supply tap if any Press the spray gun lever 33 to discharge all residual pressure Connect the lance hose 21 to the spray gun 19 depending on the type of high pressure cleaner you have Operation H in Fig 7 STANDARD OPERATION HIGH PRESSURE Ensure that the nozzle holder head OPERATION WITH DETERGENT paragraph 24 is not in the detergent dispensing position see also the Start the engine referring to the relevant operating and maintenance manual Open the water supply tap if any Press the spray gun lever 33 checking that the nozzle spray is uniform and there are no drips If necessary regulate the pressure by way of the pressure regulating knob 17 Turn it increase pressure anticlockwise to reduce it You can see the pressure on the pressure indicator 18 clockwise to CAUTION Before expecting maximum performance of the high pressure cleaner it is good practice to warm the engine up for a couple of minutes OPERATION WITH DETERGENT The recommended detergents are more than 90 biodegradable On how to use the detergent please refer to the instructions given on the detergent label FDX BLADXL PRO In the case of suctioning from the high power cleaner s tank 25 remove the cap 26 and being careful not to spill any liquid maximum capacity is 3 5 I 0 92 US gal fill the tank with the solution wanted FDX ENDURANCE Put the hose 31 in the external tank which has already been prepared with detergent to the strength required in this case too follow the indications given for the dosage on the detergent pack label Turn the nozzle holder head 24 as schematized in Fig 7 a and then operate the spray gun lever 33 and start dispensing detergent Release the lever 33 and turn the nozzle holder head 24 as schematized in Fig 7 b to stop dispensing detergent and return to high pressure operation STOPPING OPERATION When the spray gun lever 33 is released it stops the high pressure jet and the machine goes to the bypass mode Pressing the spray gun lever 33 again the high pressure jet starts again 23

Скачать