Bomann WA 5612 Инструкция по эксплуатации онлайн [13/14] 75004

06/2012

Proper maintenance on the washing machine can extend its working life. The surface can be cleaned

with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the

wet cloth to wipe it off immediately. No sharp items are allowed to strike the cabinet.

Please note: formic acid and its diluted solvents or equivalent are forbidden.

Cleaning the Door/Drum

Clean the inside of the door and the drum regularly, you can do like that:

- Clean with a cloth to remove dirt or fiber residues.

- Choose the program “Drum Clean” without any clothes inside, it can clean the drum by itself.

Cleaning the Gasket

Fiber residues in the sealing ring can lead to a loss of water. Therefore remove fiber

residues and other textiles.

Clean detergent drawer and its housing

- Press down on the release catch and at the same time pull the drawer right out of the machine

and take out the drawer, wash all guides carefully with water.

- Use a bottle brush to remove detergent residues inside the drawer housing.

- Replace the drawer.

Clean the Water Inlet Filter

The inlet filter should be cleaned every 1 - 3 months.

- Close the tap.

- Unscrew the water inlet hose.

- Clean the filter with a small brush.

- Install the water inlet hose firmly again, open the tap and make sure that no water drips from the

hose.

Cleaning the Drain Pump Filter, Remove Foreign Bodies

The foreign body trap in the drain pump prevents that rinsed parts blocks the drain pump system.

Clean the trap periodically to ensure the normal operation of washing machine.

Check the foreign body trap if the water in the wash cycle will not drain or increased noise can be

heard during the pumping.

CAUTION: First, drain the water and then open the trap to clean away foreign bodies.

Take care if the drained water is hot.

1. After the power is dis-

connected, open the low-

er cover plate.

2. Turn the fastener of the

trap to the left. Look for water

leaks!

3. Remove the filter and

clean it from any foreign

body.

4. Reattach the filter again and look for a tight fit so that no water can escape. Close the bottom cover

plate.

ATTENTION: Never operate the appliance without filter.

Cold conditions