Bomann WA 5612 [14/14] Repairs

Bomann WA 5612 [14/14] Repairs
14
06/2012
- Close the tap.
- If the water inlet hose is frozen, wrap the hose connection with a hot-towel.
- Remove the inlet hose and soak it in warm water.
- Full fill the drum with 2-3 l of warm water.
- Wait a few minutes, until the water has melted, then plug the cord in and select the program 'spin'
and restart the machine.
- Make sure in future that the room temperature is above 0°C.
Repairs
CAUTION
Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs
constitute a risk for the user and will void the warranty!
What if . . . Troubleshooting
Certain problems are due to lack of simple maintenance or oversights. Before contacting your local
Service-Centre, please carry out the checks listed below.
Problem
Possible Cause
Solutions
No water inlet
(Error code E1)
- Is the water tap open or not enough
water pressure?
- Is the drain hose plugged in?
- Is the sensor defective or is a hose
leaking?
- The drain valve is defective.
- The circuit board is defective.
- Check the tap and the water pres-
sure.
- Install the drain hose.
- Check the water sensor and the
hose, change if necessary.
- Contact a specialist.
- Contact a specialist.
Door lock alarm
(Error code E2)
- Is the door properly closed?
- Is the laundry caught between door
and seal?
- The door lock is damaged.
- The circuit board is defective.
- Close the door well.
- Pull the laundry into the drum.
- Contact a specialist.
- Contact a specialist.
No water outlet
(Error code E3)
- Is the filter clogged?
- Is the drain hose clogged or kinked.
- The valve is defective.
- Is the plug connected correctly or is
it a line fault?
- The water sensor is defective.
- The circuit board is defective.
- Clean the filter.
- Clean and check the hose.
- Contact a specialist.
- Check the plug or contact a spe-
cialist.
- Contact a specialist.
- Contact a specialist.
Water overflow /
water sensor
(Error code E4)
- The inlet valve is defective.
- Are the hoses connected correctly?
- The water sensor is defective.
- The circuit board is defective.
- Contact a specialist.
- Check the hose connections.
- Contact a specialist.
- Contact a specialist.
The motor does not
work
(Error code E5)
- The connection between the motor
and wire is not secure.
- The motor is over-heated.
- The motor is defective.
- The circuit board is defective.
- Contact a specialist.
Problem with
heating element
(Error code E6)
- The connection of the heating is
wrong or defective.
- The heating element is defective.
- The circuit board is defective.
- Contact a specialist.
Temperature sen-
sor fault
(Error Code E7)
- The connection of the temperature
sensor is wrong or defective.
- The sensor is defective.
- The circuit board is defective.
- Contact a specialist.
Are you interested in other Bomann products? Please visit our website:
www.bomann.de
Distribution: C. Bomann GmbH • Heinrich-Horten-Str. 17 • D-47906 Kempen
Скачать