HPP CH 25/500 (1450 об/мин) [14/76] Installation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

HPP CH 25/500 (1450 об/мин) [14/76] Installation

HPP CH 18/500 (1000 об/мин) [14/76] Installation
14
UNpAcKING
WARNING
• Duringunpacking,alwayswearglovesandprotectiveeyewear,topreventinjuringhandsandeyes.
• Thepumpisaheavycomponent(alsorefertothe“Specications and technical data” paragraph).Itisbesttherefore
toopenandmovethepackagingaccordingtotheinstructionsonthepackagingitself,usinghandlingandlifting
equipmentwithacapacitycompatiblewiththegrossweightindicatedontheshippingdocument.
• Liftingoperationsmustbeperformedbyexpertpersonnel,inaccordancewiththeworkers’safetyregulationsapplicable
inthecountrywherethemachineintegratingthepumpisassembled.Inparticular,operationsmustbeperformedvery
slowly,withoutanysuddenloadshifts.
• Thepackagingelements(plasticbags,staples,etc.)mustnotbeleftwithinreachofchildrenastheyrepresentpotential
hazardsources.
• Packagingcomponentsmustbedisposedofaccordingtotheregulationsinforceinthecountrywherethemachine
integratingthepumphasbeenmanufactured.
Plasticpackagingmustnotbediscardedintheenvironment.
• Afterunpackingthepump,makesurenopartsaremissingandthatallpartsareinperfectcondition,andthatthe
identicationplateisinplaceandlegible.
Incaseofanydoubt,donotinstallthepump,butcontacttheManufacturer’sAfter-SalesService.
• Themanualsandthewarrantycerticatemustalwaysaccompanythemachineintegratingthepumpandmade
availabletotheenduser.
cAUTION
• Thepumpmustbehandledcautiously,avoidingjerksandknocks.
STANdARd fITTINGS
Make sure the purchased product consists of the following elements:
• pump;
• pumpmanual(generalsection);
• pumpmanual(specicpartforeachseries);
• declarationofconformity;
Incaseofproblems,contacttheManufacturer’sAfter-Sales Service.
OpTIONAL AcceSSORIeS
WARNING
• Inadequateoptionalaccessoriescouldnegativelyaectpumpoperationandmakethishazardous.Onlyeveruse
genuineoptionalaccessoriesrecommendedbytheManufacturer.
• Asregardsgeneralinformation,safetyprecautions,installationandmaintenanceofoptionalaccessories,refertothe
accompanyingdocuments.
The standard pump equipment can be integrated with: pressure unloader/regulation valve, pressure relief valves,
check valves, suction lters, pressure accumulators, pressure gauges, etc.
ForfurtherdetailscontactyourdealerortheManufacturer’sAfter-SalesService.
INSTALLATION
WARNING
• TheSkilled Technicianmustabidebytheinstallationinstructionscontainedinthismanual,inparticular,the
specicationsofthemotor(electricorinternalcombustion),tobecoupledtothepumpmustbeinconformitywith
theconstructivespecicationsandperformanceofthepump(power,rotationspeed,anging,etc.),asshownonthe
technicaldataplateandthecontentsofthismanual.
• Undernocircumstancesmustthepumpberun:
- continuously;
- atapressureabovethatshownonthetechnicaldataplate:inthisrespect,alwaysmakesurethepressure
unloader/regulationvalveandpressurereliefvalvearecorrectlysetandthatthesettingisensuredforexampleby
meansofapaintedmark;
- atarotationspeedabovethatshownonthetechnicaldataplate;
- atarotationspeedbelow500RPM.
• The machine integrating the pump must be made in such a way as to ensure conformity with the safety
requirements indicated in the European Directives. This fact is guaranteed by CE markings and by the
Declaration of Conformity of the Manufacturer of the machine integrating the pump.

Содержание

Похожие устройства

Скачать