Bomann GS 176 230L [24/25] Aintenance

Bomann GS 176 230L [24/25] Aintenance
10
03/2012
Defrosting
Because of automatical “NoFrost-System” the freezer keeps free from ice inside. A defrosting proce-
dure isn´t necessary.
Operating noise
NORMAL NOISE
TYPE OF SOUND
CAUSE/ S
OLUTION
Mumbling
Caused by the compressor during its operation.
This is stronger when it turns on or off.
Liquid sounds
Caused by the circulation of the refrigerant in the
device.
Click sounds
The temperature control turns the compressor on or
off.
Disturbing noises
Vibration of the shelves or cooling coils check if
those are securely fastened.
Turning off
Disconnect the plug or unscrew the fuse in order to turn off the device.
If the device will not be operated for a longer period of time:
Remove the entire food from the device.
Disconnect the plug or turn off / unscrew the fuse.
Thoroughly clean the device (refer to chapter of “Cleaning and Care”).
Keep the door open in order to prevent bad odors.
TIPS FOR ENERGY SAVING
Disconnect the plug if you do not use the device.
Do not install the device near stoves, heaters or other heat sources. In case of higher ambient
temperatures, the compressor will run more frequently and longer.
Ensure sufficient ventilation at the bottom and rear side of the device.
Never block any ventilation openings.
Allow warm dishes to cool down before putting them in the device.
Do not open the door longer then necessary.
Avoid opening all freezer compartments at the same time.
Make sure that the temperature in the freezer does not rise above -18°C.
The device should be defrosted regularly.
Always keep the condenser – metal grid on the rear side (if existing) – clean.
Make sure the door sealing is in good order for the door to close properly.
MAINTENANCE AND CLEANING
Cleaning and care
For hygienic reasons, clean the interior and accessory parts regularly.
WARNING
Always disconnect the plug or turn off/ unscrew the fuse before cleaning. Pull the plug and not the
cable.
Do not use steam cleaners for cleaning the device; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage the plastic parts. The device must be dry before
restarting operation.
Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic acid or
cleaning agents containing acetic acid can damage plastic parts. Prevent contact of any part with
such substances. Do not use abrasive cleaning agents.
Pls. do as follows:
Remove all food and keep covered at a cool location.
Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).
After thorough drying, restart operation.

Содержание

Скачать