Bomann GS 199 [20/42] Installation installation installation installation

Bomann GS 199 [20/42] Installation installation installation installation
20
Delivery scope
Delivery scopeDelivery scope
Delivery scope
4 x freezing drawer, 1 x ice-cube tray
Installation
InstallationInstallation
Installation
Conditions for the installation location
Conditions for the installation location Conditions for the installation location
Conditions for the installation location
Sufficient ventilation around the device is necessary in order for the heat to dissipate properly and
to guarantee efficient cooling operation at low power consumption. For this purpose, leave suffi-
cient space around the device:
- minimum distance of 5 cm between rear side and wall;
- at least 1 cm on both sides;
- keep proper space in front of the device in order to open the door at an angle of 160°.
Only install at a location with an ambient temperature suitable for the climate class of the device.
For information on the climate class, please refer to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the device.
Place the device on a steady and safe surface. If the device is not horizontally leveled, adjust the
feet accordingly.
Install the device for the wall socket to be freely accessible.
Avoid the installati
Avoid the installatiAvoid the installati
Avoid the installation:
on:on:
on:
- near heaters, next to a stove, direct sunlight or any other heat sources;
- at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible
to corrosion under such circumstances;
- near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.) and in rooms which
may have poor air circulation (e.g. garages).
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform to the local standards and regulations.
Improper connection may cause to an electric shock
electric shockelectric shock
electric shock!
Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
The accessibility of the power plug must be ensured in order to disconnect the device from the
power supply in case of an emergency.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
In case you disconnect the device or in case of power failure: Wait for approx. 5 minutes before re-
starting the device.
Ensure that your mains power corresponds with the specifications of the appliance. The specifica-
tions are printed on the rating label.
Connect the mains cable to a properly installed and earthed wall outlet.

Содержание

Скачать