Bomann KSW 344 [33/100] Location

06/2013

Energy consumption / year 131.0 kWh

Climate class N (+16°C up to +32°C)

Noise level 43 dB(A) re 1 pW

Type Free-standing

Power supply 220-240 V, 50/60 Hz

Input power 70 W

Fuse protection 1 A

Light, LED 1 W

Dimensions H x W x D 52.0 x 42.0 x 48.0 cm

Net weight 13.8 kg

(1)

The actual energy consumption depends on the use and installation of the device.

All device-specific energy data have been determined by the manufacturer under

laboratory conditions in accordance with pan-European standardized measuring

methods. These are regulated by EN ISO 15502. The actual energy consumption de-

pends on the usage and might therefore also be above the values determined by the

manufacturer under standard conditions.

An expert knows these relations and will execute the tests with special measurement

instruments in accordance with the regulations in place.

MANUFACTURER DATA

Product is subject to changes and improvements.

installatiOn

Location

Sufcient ventilation around the device is necessary in order for the heat to dissipate

properly and to guarantee efcient cooling operation at low power consumption. For

this purpose, leave sufcient space around the device.

• Minimum clearance of 5 cm between rear side and wall,

• at least 20 cm on both sides and on the top of the device.

• Leave proper space in front of the device in order to open the door at an angle of

120°.

IMPORTANT

• Do not expose the device to direct sunlight.

• Do not place near heaters, next to a stove or any other heat sources.

• Do not use the device outdoors.

• Only install at a location with an ambient temperature suitable for the climate class

of the device.

For information on the climate class, please refer to chapter “Specications“ or to

the rating label located in the interior or on the rear side of the device.

• Avoid installation at locations with high humidity (e.g. outdoors, cellar, bathroom),

as metal parts would be susceptible to corrosion under such circumstances.