![Bomann GSPE 787 [2/31] For detailed operating method read the corresponding content on the instruction manual](/img/pdf.png)
Bomann GSPE 787 [2/31] For detailed operating method read the corresponding content on the instruction manual
![Bomann GSPE 787 [2/31] For detailed operating method read the corresponding content on the instruction manual](/views2/1081009/page2/bg2.png)
Witheachwashcycle.
Compartment
For pro gramm es with pre-wash only.
(Follow the user instructions !)
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models w ith water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to f ill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt le vel
Load the baskets
Select a p rogramme
Close the door , turn on the water tap. The machine will start working after about 1 0 seco nds.
Running the dishwasher
Switch off the applia nce
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 min utes) before unloading the dishwa sher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
The y will a lso dry better.Unload the appliance, startingfrom the lower b asket.
Changing theprogramme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pa ns,
then l oad the baskets. Refer to the dishwashe r loading instruct ions.
Press the Programme butto n until the selected progra m me li ghts up .
( See the section entitled Operationg instruction )“”
When the working cy cle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the ON/OFF button.
If the appliance is switched
off during a wash cycle.
Op en t he do or carefull y.
Hot st eam may escape
when thedoorisopened!
If the appliance is switched off during a wash cycle, when switched
on agai n, plea se re-select th e washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance Press the On/Off button to switch on the applian c e, Open the door.
1.Open the door a little to sto p the dishwasher.
2.After the spra y arms stop working, you can ope n the door completely.
3.Add the forgotten dishes.
4.Close the door, the dishwa sher will star t running again after 10 sec onds.
For detailed operatingmethod read the corresponding content onthe instructio nmanual.
1. A running cycle can only be modified if it has been running for a short time. O therwise the deterg ent
m ay have alre ady be en released and the water already drained. If this is the case, the de tergent
dispenser must be refilled.
2. Open the door a little to stop the washing, then press the Program button for mo re than 3 seconds to
c ancel the running program me.
3. Select a new programme, then close the door. The machine will restart after about 10 seconds.
Содержание
- For detailed operating method read the corresponding content on the instruction manual 2
- If there is no salt warning light in the control panel for some models you can estimate when to fill the salt into the softener by the number of cycles the dishwasher has run 2
- Attention before or after loading the dishwasher baskets 3
- Cutlery basket 2 3
- Dear customer 3
- Error codes 6 3
- Pass it on to any subsequent owner of the appliance 3
- Please carefully read this manual before using the dishwasher it will help you to use and maintain the dishwasher properly 3
- The manufacturer following a policy of constant development and updating of the product may make modifications without giving prior notice 3
- This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops offices and other working environments farm houses by clients in hotels motels and other residential type environments bed and breakfast type environments 3
- This manual contains sections on safety instructions operating instructions installation instructions and troubleshooting tips etc 3
- To review the section on troubleshooting tips will help you to solve some common problems by yourself 3
- Turning on the appliance 4 3
- During installation the power supply must not be excessively or dangerously bent or flattened 4
- Improper connection of the equipment grounding conductor can result in the risk of an electric shock check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded do not modify the plug provided with the appliance if it does not fit the outlet have a proper outlet installed by a qualified electrician 4
- Use only detergent and rinse additives designed for an automatic dishwasher never use soap laundry detergent or hand washing detergent in your dishwasher keep these products out of the reach of children 4
- When using your dishwasher follow the precautions listed below 4
- Adjusting salt consumption 7
- Clark british degree 7
- Contact your local water board for information on the hardness of your water supply 7
- Dh 1 5 clarke 1 8 fh 0 78mmol l 1 7
- Dh german degree 7
- Fh french degree 7
- If your model does not have any water softener you may skip this section 7
- Always use the salt intended for use with dishwasher the salt container is located beneath the lower basket and should be filled as explained in the following 8
- Attention 8
- Function of rinse aid 8
- Only use salt specifically designed for the use in dishwashers every other type of salt not specifically designed for the use in a dishwasher especially table salt will damage the water softener in case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is liable for any damages caused only fill with salt just before starting one of the complete washing programs this will prevent any grains of salt or salty water which may have been spilled remaining on the bottom of the machine for any period of time which may cause corrosion 8
- Rinse aid dispenser 8
- The salt container must only be refilled when the salt warning light in the control panel comes on depending on how well the salt dissolves the salt warning light may still be on even though the salt container is filled if there is no salt warning light in the control panel for some models you can estimate when to fill the salt into the softener by the cycles that the dishwasher has run 2 if there are spills of the salt a soak or a rapid program should be run to remove the excessive salt 8
- Adjusting rinse aid dispenser 9
- Detergents 9
- If there is no rinse aid warning light in the control panel you can estimate the amount from the colour of the optical level indicator c located next to the cap when the rinse aid container is full the whole indicator will be dark as the rinse aid diminishes the size of the dark dot decreases you should never let the rinse aid level fall 1 4 full 9
- Proper use of detergent 9
- When to refill the rinse aid dispenser 9
- Amount of detergent to use 10
- Concentrated detergent 10
- Detergent dispenser 10
- Detergent tablets 10
- Fill in detergent 11
- Are not suitable are of limited suitability 12
- Adjusting the upper basket 15
- Folding spikes of lower basket 15
- Capacity 9 setting position upper basket upper wheels on rails rinse aid setting 6 the power consumption of off mode is 0w left on mode is 0 w 16
- En 50242 this programme is the test cycle the information for comparability test in accordance with en 50242 as follows 16
- For heaviest soiled crockery and normally soiled pots pans dishes etc with dried on soiling 16
- For lightly soiled crockery and glass 16
- For lightly soiled load that do not need excellent drying efficiency 16
- For normally soiled loads such as pots glasses and lightly soiled pans 16
- Means need to fill rinse into the rinse aid dispenser 16
- Pre wash 50 pre wash wash 65 rinse rinse rinse 55 drying 16
- This is standard programme it is suitable to clean normally soiled tableware and it is the most efficient programme in teams of its combined energy and water consumption for that type of tableware 16
- A cycle that is underway can only be modified if it has only been running for a short time otherwise the detergent may have already been released and the appliance may have already drained the wash water if this is the case the detergent dispenser must be refilled see the section entitled loading the detergent open the door a little to stop the washing press the programme button more than 3 seconds to cancel the running programme then you can select other programmes see the section entitled starting a wash cycle when you select intensive normal eco programmes you can select the 3in1 function 17
- Close the door a 17
- Draw out the lower and upper basket load the dishes and push them back it is commended to load the lower basket first then the upper one see the section entitled loading the dishwasher pour in the detergent see the section entitled salt detergent and rinse aid insert the plug into the socket the power supply is 220 240 vac 50 hz the specification of the socket is 10a 250vac make sure that the water supply is turned on to full pressure press the on off button and the on off light or the display will turn on press the program button to select a desired wash cycle fter 10 seconds the machine will work 17
- Open the door carefully 17
- Switch off the dishwasher 17
- Unloading the dishwasher 17
- Filter assembly 18
- Cleaning the door 19
- Cleaning the filter 19
- Cleaning the spray arms 19
- It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings to remove the spray arms screw off the nut clockwise to take out the washer on top of the spray arm and remove the arm wash the arms in soapy and warm water and use a soft brush to clean the jets replace them after rinsing them thoroughly 19
- Protect against freezing 19
- Remarks 19
- The entire filter assembly should be cleaned once a week 19
- When cleaning the filters don t knock on them otherwise the filters could be contorted and the performance of the dishwasher could be decreased 19
- After every wash 20
- If the appliance must be moved try to keep it in the vertical position if absolutely necessary it can be positioned on its back 20
- Installation preparation 20
- Moving the appliance 20
- No solvents or abrasive cleaning 20
- Remove the plug 20
- When not in use for a longtime 20
- Figure1 21
- Figure2 21
- Figure3 21
- The aesthetic wooden panel could be processed according to the figure 3 21
- Unit mm 21
- Figure4a 22
- Connection of drain hoses 23
- Figure5 23
- Figure6 23
- Tension adjustment of the door spring 23
- Dishwasher installation steps 24
- Figure 7 24
- Dishwasher must be level for proper dish rack operation and wash performance 25
- Figure 8 25
- Illustration of feet adjustment 25
- Level the dishwasher by adjusting the four leveling legs individually 25
- Note the maximum adjustment height of the feet is 60 mm 25
- Place level on door and rack track inside the tub as shown to check that the dishwasher is level 25
- Warning 25
- When level the dishwasher please pay attention not to let the dishwasher tip over 25
- A hose that attaches to a sink spray can burst if it is installed on the same water line as the dishwasher if your sink has one it is recommended that the hose be disconnected and the hole plugged 26
- Connect the cold water supply hose to a threaded 3 4 inch connector and make sure that it is fastened tightly in place if the water pipes are new or have not been used for an extended period of time let the water run to make sure that the water is clear and free of impurities if this precaution is not taken there is a risk that the water inlet can get blocked and damage the appliance 26
- Extension hose 26
- How to drain excess water from hoses 26
- Positioning the appliance 26
- Syphon connection 26
- The safety supply hose consists of the double walls the hose s system guarantees its intervention by blocking the flow of water in case of the supply hose breaking and when the air space between the supply hose itself and the outer corrugated hose is full of water 26
- Water outlet 26
- Use only the special dishwasher detergent to avoid suds if this occurs open the dishwasher and let suds evaporate add 1 gallon of cold water to the tub close and latch the dishwasher then select any cycle dishwasher will drain out the water at the first step open the door after draining is stop and check if the suds is disappeared repeat if necessary 28
- If overflow occurs turn off the main water supply before calling a service if there is water in the base pan because of an overfill or small leak the water should be removed before restarting the dishwasher 29
- When some malfunctions come on the appliance will display error codes to warn you 29
- Technical data sheet 31
Похожие устройства
- Dell Latitude E5520 L105520105R Инструкция по эксплуатации
- Bomann GSPE 786 Инструкция по эксплуатации
- Dell Latitude E5520 /L025520107L/ Инструкция по эксплуатации
- Dell Latitude E6410 /L106410116RR/ Инструкция по эксплуатации
- Bomann GSPE 874 Инструкция по эксплуатации
- Akai AM800-DS20 Инструкция по эксплуатации
- Dell Latitude E6320 /L026320104R/ Инструкция по эксплуатации
- Bomann GSPE 873 Инструкция по эксплуатации
- Akai ARF 201-380 Инструкция по эксплуатации
- Acer V275HL Abid Инструкция по эксплуатации
- Bomann GSPE 774.1 Инструкция по эксплуатации
- Akai ARF 186-340 Инструкция по эксплуатации
- Apple MD103A8GH3RS/A Инструкция по эксплуатации
- Bomann GSPE 773.1 Инструкция по эксплуатации
- Apple MD104AC1H5RS/A Инструкция по эксплуатации
- Bomann GSPE 772.1 Инструкция по эксплуатации
- Akai ARL 2522M Инструкция по эксплуатации
- Apple MD104AH4RS/A Инструкция по эксплуатации
- Bomann GSPE 771.1 Инструкция по эксплуатации
- Bosch GID 14A50 Инструкция по эксплуатации