Haier HWM70-FD10829 [19/29] Care and cleaning

7-Care and cleaning

1. Turn of and unplug the machine (Fig. 7-6.1).

2. Open service ﬂap. You can either use a coin or a

screwdriver (Fig. 7-6.2).

3. Provide a ﬂat container to catch leach water

(Fig. 7-6.3). There could be bigger amounts!

4. Pull the drainhose out and hold its end above the

container (Fig. 7-6.3).

5. Take the sealing plug out of the drainhose (Fig.

7-6.3).

6. After complete drainage close drainhose (Fig.

7-6.4). and push it back into the machine.

7. Unscrew and remove counter clockwise the pump

ﬂter (Fig.7-6.5).

8. Remove contaminants and dirt (Fig.7-6.6).

7-6.3

7-6.4

7-6.5

7-6.6

7.5 Long periods of disuse

If the appliance is left idle for a longer period:

1. Pull out the electrical plug (Fig. 7-5.1).

2. Turn of water supply (Fig. 7-5.2).

3. Open the door to prevent formation of moisture

and odours. Let door open while not used.

Before next usage check carefully power cord, water

inlet and drain hose. Make sure everything is properly

installed and without leakage.

7-5.1 7-5.2

WARNING!

hot! Before any action please ensure water has

cooled down.

Note: Hygiene

After long periods of disuse we recommended to run programme Drum Clean with no

load and small amount of detergent in washing agent compartment (2) or special ma-

chine cleaner to remove possibly corruptive residues.

for instanvce if the appliance:

▶ doesn´t drain the water.

▶ doesn´t spin.

▶ cause unusual noise while running.

7-6.27-6.1

7.6 Pump ﬁlter