Haier HWM70-FD10829 [27/29] Installation

9-Installation

9.8 Electrical Connection

Before each connection check if:

▶ power supply, socket and fusing are appropriate to

the rating plate.

▶ the power socket is earthed and no multi-plug or

extension are used.

▶ the power plug and socket are strictly according.

Put the plug into the socket (Fig. 9-8).

9-8

WARNING!

▶

dry and leak free!

▶ Take care these parts are never to be crushed, kinked, or twisted

▶ If the supply cord is damaged, it must be replaced by the service agent (see warranty

card) in order to avoid a hazard. .

Note: Hygiene

tenance run programme Drum Clean with no load and small amount of detergent in

washing agent compartment (2) or with special machine cleaner to remove possibly

corruptive residues.

9.7 Fresh Water Connection

9-7.29-7.1

Make sure that the gaskets are inserted.

1. Connect the water inlet hose with the angled end

to the appliance (Fig. 9-7.1). Tighten the screw

joint by hand.

2. The other end connect to a water tap with a 3/4“

thread (Fig. 9-7.2).