Beon BN-860 [10/16] Instruction manual

10 INSTRUCTION MANUAL

If you do not know the product material, find a place on it that is invisible when worn and try to

choose the appropriate temperature.

Filling the water tank (5)

 Make sure the appliance is unplugged before filling the water tank.

 Switch off the steam supply by setting the steam regulator (8) to «0».

 Lift the lid of the water tank (2).

 Using a measuring Cup, gently pour boiled or distilled water into the water tank to the maximum

level.

 Do not pour chemically softened water into the tank and do not use flavoring agents.

 If tap water is too hard, fill only with distilled or demineralized water.

 The water filling opening must not be open when using the iron.

 When refilling the tank with water, always disconnect the iron from the electrical outlet.

 At the end of the work it is always necessary to completely remove the water from the tank.

Attention! After draining water from the cooled iron, install it vertically (on the support) and turn on

for 2 minutes in the maximum heating mode, then disconnect the iron from the mains.

Auto-disconnect function

Thanks to the auto-off function, the iron automatically turns off if it has not been moved for some

time: after 30 seconds when the iron is horizontal, and after 8 minutes when the iron is vertical.

Turning on the indicator light indicates that the auto-off function has been activated. As Soon as you

move the iron, the auto-off function will turn off and the iron will continue working in the set mode.

Steam Ironing

 Place the appliance on a horizontal surface.

 Set the steam regulator (8) to «0» and fill the tank with distilled or boiled water (not more than

350 ml).

 Connect the appliance to the mains, set the temperature regulator (4) and

 The steam regulator (8) to the maximum position.

 The burning heat indicator lamp (11) indicates that the iron is heating up.

 When the heat indicator goes out – the iron will reach the desired temperature.

 The steaming function can only be performed at maximum heating temperatures. Otherwise, hot

water may be released.

 Pressing the steam button (9) achieves the «steam blow» effect.

 Steam can be supplied in the vertical position of the iron.

Attention! The hot steam! Danger of getting burned!