Brayer BR2831 [7/44] Before the first use

Brayer BR2831 [7/44] Before the first use
7
EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 4 hours before
using.
Unpack the unit and remove all the packaging
materials.
Keep the original package.
Read the safety measures and operating
recommendations.
Check the delivery set.
Examine the unit for damages, in case of damage do
not plug it into the mains.
Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains.
Clean the deep fat fryer body surface with a slightly
damp cloth and then wipe it dry.
Remove the lter from the lid (2) (g. 1).
Press the «PUSH»-button (13) (g. 2), the lid (2) will
open (g. 3).
Take the handle (11), shift the lock (12) and lift the
handle (11) to the horizontal position, release the lock
(12) (g. 4).
Take the basket (15) out by the handle (11) (g. 5).
Remove the deep fat container (14) (g. 6).
Take the lid (2) with your hands and remove it
upwards (g. 7).
Wash the lter, the lid (2), the basket (15) and the
deep fat container (14) with warm water and a neutral
detergent, rinse, then wipe dry.
Rinse the deep fat container (14) from the inside only.
Install the deep fat container (14) and the lid (2) back
to their places.
PRODUCTS FRYING
ATTENTION!
- It is recommended to use good quality vegetable
oil or a multi-purpose deep fat frying oil.
- It is not recommended to mix di󰀨erent oils.
- Do not use an oil and fat mixture for deep fat
frying, this mixture may suddenly foam and spill
out of the deep fat container (14).
- If you use cooking, animal or vegetable fat, chop it
into small pieces and place it in the container (14);
using the temperature control knob (10), set a low
temperature, after fat melting you can bring the
temperature to the maximum recommended for
this type of fat.
FRYING RECOMMENDATIONS
- When frying several types of products, put
products requiring lower processing temperature
rst.

Содержание

Скачать