Brayer BR1106 Инструкция по эксплуатации онлайн [11/56] 625012

Brayer BR1106 Инструкция по эксплуатации онлайн [11/56] 625012
11EN
3. Make citric acid solution: 2 teaspoons of acid to 1
litre of water and pour the solution into the water
tank (15). Install the tank (15) back to its place.
4. Install the co󰀨ee lter (6) into the holder (5) having
preliminary matched the ledge on the lter (6) with
the groove on the holder (5) and turn the lter (6)
counter/clockwise to x the lter. Do not put ground
co󰀨ee into the lter (6).
5. Install the lter holder (5) into the co󰀨ee maker. The
holder (5) ledges should match the grooves on the
boiler « », after that turn the lter holder handle
(3) to the right until bumping « ».
6. Place a suitable cup on the grid (2).
7. Insert the power plug into the mains socket.
8. Switch the co󰀨ee maker on, setting the power
switch (19) to the «I» position, the indicator (11)
will light up, and the ready indicator (10) will start
ashing.
9. Press the button (9) « » and ll a cup of about
100 ml capacity with water (it is necessary to drain
the water from the boiler and ll the boiler with the
citric acid solution), switch the water supply o󰀨 by
pressing the button (9) « » again.
10. Wait until the indicator (9) lights up, then switch the
water supply on by pressing the button (9) « »
and ll a cup of about 100 ml capacity, press the
button (9) « » again to switch the water supply
o󰀨 and pour the liquid out of the cup.
11. After a while repeat the procedure described in
the paragraph 10 and ll the cup of about 100 ml
capacity again.
12. Press the steam supply button (8) « », wait
until the indicator (12) lights up. Put a suitable
bowl under the tip (18) and slightly open the steam
supply by turning the knob (16) «
/ » to the
position «
». Carefully turn the knob (16) « / » to
the maximal steam release position, release the
steam for about 1 minute, then close the steam by
turning the knob (16) «
/ » to the position « » and
switch the steam supply o󰀨 by pressing the button
(8) « ».
13. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨
button (19) «
». Wait for 10-15 minutes.
14. Perform the steps 10 and 11 at least 3 times.
15. Repeat the cleaning procedure for the steam
release channels described in the paragraph 12.
16. With small intervals, repeat the boiler cleaning
procedure (paragraph 10) until the citric acid
solution dissolves in the tank (15) completely.
17. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨
button (19) «I».
18. Fill the water tank (15) with clear water until
maximal level and repeat the steps 10, 12 at least 3
times without the 10-15 minute break.
19. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨
button (19) «
».
Note: to remove the scale you can use special
descaling agents for co󰀨ee makers and co󰀨ee

Содержание

Скачать