Brayer BR1106 [8/56] Making cappuccino

Brayer BR1106 [8/56] Making cappuccino
8 EN
(9) « ». After 15-20 seconds press the button (9)
« » again to switch the water supply o󰀨 and pour
the water out of the cup.
Preheating is over.
MAKING ESPRESSO
Switch the water supply on by pressing the button (9)
« », watch the cup lling with the ready co󰀨ee,
press the button (9) « » again to switch the water
supply o󰀨. Switch the co󰀨ee maker o󰀨 by setting the
power switch (19) to the position «
», the indicator
(11) will go out.
Wait until the co󰀨ee maker cools down and remove
the lter holder (5) by turning the handle (3) to the left
« ». Remove the ground co󰀨ee remnants and wash
the lter (6).
For easy removing of the co󰀨ee remnants use the
retainer on the handle (3) to prevent the lter (6) from
falling o󰀨 the holder (5).
Notes:
- The cups should be preliminary heated up, when
water heats up in the boiler, place the cups on the
upper tray.
- If you need to promptly remove the lter holder (5),
you have to reduce the pressure in the boiler, switch
the co󰀨ee maker o󰀨 by pressing the power switch
(19) to the position «
», place a suitable cup under
the tip (18) and slightly open the steam supply by
turning the knob (16) «
/ » to the position « ».
After the pressure in the boiler is released, you can
remove the lter holder (5).
MAKING CAPPUCCINO
ATTENTION!
When making co󰀨ee do not leave the operating
co󰀨ee maker unattended, as it is necessary to watch
the cup being lled with ready co󰀨ee!
AFTER PREHEATING:
Make sure that the control buttons (8, 9) are in the
o󰀨 position.
Make sure that the steam supply is switched o󰀨, to
do that set the knob (16) «
/ » to the position « ».
Remove the lter holder (5) by turning the handle (3)
to the left « » and remove the lter holder (5).
Put ground co󰀨ee in the lter (6), slightly tamp the
ground co󰀨ee with the back side of the measuring
spoon (20).
Install the lter holder (5) into the co󰀨ee maker. The
holder (5) ledges should match the grooves on the
boiler « », after that turn the lter holder handle
(3) to the right until bumping « ».
Wait until the indicator (10) ights up, the co󰀨ee maker
is ready for making co󰀨ee.

Содержание

Скачать