Home
Главная
Brayer
Увлажнитель Воздуха
BR4705
Инструкция по эксплуатации Страница: 6

Brayer BR4705 [6/33] 11 en en

10 11en en

• To switch the night mode on touch the button (19)

«LIGHT

», the symbol (21) « » will light up on

the display (7). To switch the illumination off touch the

button (19) «LIGHT

» again, the symbol (21) «

» will go out.

TIMeR OPeRATIOn SeTTInG «TIMeR

• Consequently press/touch the button (14) «TIMER

» to set up the timer within the range from 1 to 12

hours with 1 hour step, the timer operation time will

be shown on the display (7) with the digital symbols

(17).

• After the preset operation time runs out, the air

humidier will be switched off.

• To switch the timer off press/touch the button (20)

«TIMER

» until the digital symbols (17) «Co»

appear on the display (7).

• Note: — to view the preset timer operation time

touch/press the button (14), the preset time will be

shown on the display (7) with digital symbols (17).

LOW WATeR LeveL InDICATIOn

• When the water tank (3) becomes empty, the air

humidier will switch off, you will hear a sound signal

and the symbol «

» will appear on the display (7).

• Switch the unit off with the button (10) «ON/OFF

», remove the nozzle (1), remove the water tank (3)

taking it by the handle (2). Unscrew the lid and ll

the water tank (3) with water, screw the lid. Place the

lled water tank (3) on the air humidier body and

• Hard water causes the appearance of mineral scale

inside the process chamber, on the sprayer and in

the water tank (3); mineral scale leads to improper

operation of the humidier.

• It is recommended to clean the process chamber and

the sprayer weekly, and to change water in the water

tank (3).

• If you are not going to use the air humidier for a

long time:

• Clean the cartridge lter after passing of about 200

l water through it, and if using hard water or a white

deposit appears on the furniture, more often.

• Remove the nozzle (1), take the water tank (3) by the

handle (2) and remove it from the air humidier body.

• Turn over the water tank (3), unscrew the lid rotating

it counterclockwise and remove it, remove the

cartridge lter, rotating it counterclockwise.

• Put the cartridge lter into a container with table

vinegar for 15-20 minutes, take the lter out and

wash it thoroughly under a warm water jet.

• Install the cartridge lter on the lid rotating it

clockwise.

CLeAnInG THe AIR FILTeR

• Press the air lter grid (8) clamp and remove the grid.

• Clean the lter from the dust and install the grid (8)

with the lter back to its place.

STORAGe

• Clean the air humidier before taking it away for

storage, make sure that the air humidier parts are

dry, pack the air humidier in the original package.

• Do not store the unit with wet cartridge lter,

remaining water in the tank (3) and the process

chamber.

• Keep the air humidier in a dry cool place out of

reach of children and disabled persons.

WARnInG!

Always switch the air humidier off and unplug it

before maintenance works or cleaning.

then install the nozzle (1).

• Switch the air humidier on and set the required

operation modes.

AIR AROMATIzATIOn FUnCTIOn

• If you want to use the aromatization function, remove

the container (9) and add some drops of water-

soluble aromatic oil into it, install the container back

to its place.

• Notes:

- use water-soluble aromatic oils only

- if you are not going to use the aromatization

function, remove the container, wash it with water,

dry and install back to its place

CLeAnInG AnD MAInTenAnCe

- pour the water out of the water tank (3) and the

process chamber;

- wash and clean the process chamber and the

sprayer;

- wash the water tank (3);

- dry the air humidier thoroughly and take it away

for storage.

WeekLY CARe

• Once a week wash the water tank (3), the process

chamber and the sprayer with warm water and

neutral detergent and rinse thoroughly with water.

• Add some detergent drops on the sprayer and wait

for several minutes. Remove the deposits from the

sprayer surface with a brush.

• Note: — you can use citric acid solution to clean the

process chamber (8) and the sprayer (11).

• Wipe the air humidier body with a soft, slightly damp

cloth and then wipe it dry.

• Do not immerse the air humidier body, the power

cord (5) and the power plug into water or any other

liquids. Provide that no liquid gets inside the air

humidier body.

• Do not use solvents or abrasives to clean the surface

of the air humidier body and the water tank (3).

CLeAnInG THe CARTRIDGe FILTeR (6)

• The cartridge lter softens water, removes

unpleasant smells and prevents generation of

bacteria.

Brayer BR4705 [6/33] 11 en en

Содержание

Похожие устройства