![Citizen CT-E301 [9/58] Caution](/img/pdf.png)
Citizen CT-E301 [9/58] Caution
![Citizen CT-E301 [9/58] Caution](/views2/1843429/page9/bg9.png)
CAUTION
Do not use the printer under the following conditions.
l Avoid locations subject to vibration or instability.
l Avoid locations where the printer is not level.
u The printer may fall and cause an injury.
u The quality of printing may deteriorate.
l Do not obstruct the printer’s air vents.
l Do not place anything on the printer.
l Do not cover or wrap the printer in cloth or blankets.
u Doing so could cause heat to build up and deform the case or start a
fire.
l Avoid using the printer near a radio or TV set or from supplying it from the same
electric outlet as these appliances.
l Avoid using the printer interconnected with a cable or cord that has no protec-
tion against noise.
(For interconnections, use shielded or a twisted pair of cables and ferrite cores,
or other anti-noise devices.)
l Avoid using the printer with a device that is a strong source of noise.
u The printer may have an adverse effect on nearby radio or TV trans-
missions. There may also be cases when nearby electrical appliances
adversely influence the printer, causing data errors or malfunction.
l Installed in any orientation other than those specified.
u Malfunction, failure, or electric shock may result.
– 9 –
Содержание
- Weee mark 2
- Compliance statement for european users 3
- General precautions 4
- Caution 6
- Safety precaution 6
- Safety precautions which should be strictly observed 6
- Served 6
- Warning 6
- Which should be strictly ob 6
- Precautions on printer installation 7
- Warning 7
- Warning 8
- Caution 9
- Caution 10
- Precautions in handling the printer 11
- Warning 11
- Warning 12
- Caution 13
- Caution 14
- Daily maintenance 14
- Caution 15
- Explanation of printer parts 21 16
- General outline 17 16
- Maintenance and troubleshooting 43 16
- Other 51 16
- Setup 28 16
- The table of contents 16
- Features 17
- General outline 17
- Make sure the following items are included with your printer 18
- Unpacking 18
- Basic specifications 19
- Bk black 19
- Body case color 19
- Contact us in advance for special combinations some of which may not be available 19
- Ct e301 tr e bk 19
- E europe 19
- Interface 19
- Market 19
- Model classification 19
- Model name 19
- Model numbers indicate printer features according to the following system 19
- Tr usb serial ethernet 19
- U north america 19
- Ub usb 19
- Wh pure white 19
- Explanation of printer parts 21
- Printer appearance 21
- Operation panel 22
- Rear connectors 22
- Refer to 4 error indications 22
- Two leds and two keys are placed on the operation panel 22
- 3 3 5 6 4 4 2 1 23
- Inside the paper cover 24
- Other built in functions 26
- Caution 27
- If no data is received within 15 seconds after each cut or print the print position is automatically slid n dots to the right the original print position is returned to at the next slide timing 27
- L auto side shift msw8 6 27
- N is the msw8 6 setting value 27
- This function dissipates heat load during frequent heat generation by a vertical ruled line or other specific head heating element 27
- Connecting the ac power cord 28
- Caution 29
- Caution 30
- Connecting interface cables 30
- Caution 31
- Pin female 9 pin female cable 31
- Place the interface cable so that people do not trip on it 31
- To connect more than one printer to a single computer by usb you must change the serial number of the usb interface 31
- Use a serial cable with the connection layout shown below 31
- Ethernet lan interface 32
- Changing network settings 33
- L access the special settings page 33
- Network status 33
- Network transmission speed 33
- This displays the page to display the current status 33
- Use a web browser to access the url of the special settings page enter the ip ad dress assigned to the printer as the part of url example for an ip address of 169 54 0 input http 169 54 0 33
- You can use a web browser to access a special settings page to check and change board settings 33
- 1 connector pin configuration 35
- Caution 35
- Connecting the cash drawer 35
- 2 electric characteristics 36
- 3 drsw signal 36
- 4 drive circuit 36
- Cash drawer kick out connector 36
- Caution 36
- Drive current approx 1 a max not to exceed 510 ms 36
- Drive voltage 24 vdc 36
- Drsw signal signal levels l 0 to 0 v h 3 to 5 v 36
- N cash drawers 1 and 2 cannot be operated at the same time 36
- N the solenoid used for the cash drawer should be 24 ω or more do not allow the electric cur rent to exceed 1 a excessive current could damage or burn out the circuits 36
- Status can be tested by commands 36
- Caution 37
- For more information please refer to the separate wall mount kit manual 37
- For wall mounting 37
- If the printer is to be wall mounted ask a service person to install it 37
- Precautions for installing the printer 37
- This product can be used horizontally or wall mounted cannot be used vertically 37
- Loading paper 38
- Caution 40
- Refer to precautions in handling the printer 40
- Caution 41
- Mm width roll paper partition 41
- Refer to 5 manual setting of memory switches 41
- Refer to precautions in handling the printer 41
- Download site for various electronic files 42
- Precautions for creating applications and practical operations 42
- After turning off the printer wear gloves and use a soft cloth or an absorbent cotton to wipe it off 43
- At this time be sure to unplug the ac power cord from the outlet 43
- Caution 43
- How to care for the printer s exterior surface 43
- How to clean the print head and platen 43
- If the print head platen or other parts of the printer are dirty the printer may not print cleanly or it could cause a malfunction it is recommended that you clean the unit peri odically approximately two to three months using the following procedure 43
- Maintenance and trouble shooting 43
- Maintenance and troubleshooting 43
- Periodic cleaning 43
- Caution 44
- Refer to precautions in handling the printer 44
- Caution 45
- Clearing a cutter error 45
- If the auto cutter stops during the auto cutter operation with the blade of the auto cutter in the open position due to foreign matter entering paper jamming etc the error led flashes 45
- Refer to precautions in handling the printer 45
- When a cutter error occurs resolve the cutter error with the following procedure 45
- Self test 46
- Hexadecimal dump printing 47
- Dense printing heavy black printing and continuous printing in a high temperature environment increase the temperature of the print head when the print head ex ceeds a certain temperature the printer stops printing and waits until the temperature of the print head decreases the error led flashes during this time when the temperature decreases printing restarts automatically 48
- Do not open the cover during printing if the cover is accidentally opened the error led flashes check the paper pull it straight out of the printer by a couple of centimeters and then close the cover printing restarts a command must be sent to restart printing depending on the memory switch setting 48
- Error indications 48
- If the auto cutter stops due to paper jamming etc the error led flashes remove the cause and press the feed key if the auto cutter still does not move and the pa per cover cannot be opened refer to clearing a cutter error 48
- If the cover is opened the error led lights and a buzzer sounds 48
- If the paper ends the error led lights and a buzzer sounds load a new paper roll the buzzer may not sound depending on the memory switch setting 48
- L cover open 48
- L cutter error 48
- L paper end 48
- L print head hot 48
- Refer to 4 clearing a cutter error 48
- The buzzer may not sound depending on the memory switch setting 48
- The status display for various messages is shown below 48
- Paper jams 50
- Precautions for performing printing for which printing speed changes 50
- External views and dimensions 51
- Printing paper 52
- Unit mm 52
- Use the paper shown in the following table or paper of the same quality 52
- Do the settings while confirming the memory switch function and settings on the print out 54
- For information on how to set the memory switches using commands please refer to the command reference 54
- Individual setting mode 54
- Manual setting of memory switches 54
- Memory switches are used to set various printer settings memory switches can be set manually or by utilities or commands this section explains how to perform manual set tings 54
- Set the memory switches individually 54
- Memory switch initialization 55
- Set all the memory switches to the factory settings 55
- All memory switches change to the factory settings 56
- Close the paper cover 56
- Press the feed button for at least two seconds 56
- The function of each memory switch is shown in the following table shaded values are factory settings 56
Похожие устройства
- Citizen CT-E301 Command Reference
- Citizen CT-E351 Техническое описание
- Citizen CT-E351 Network Manual
- Citizen CT-E351 Руководство по эксплуатации
- Citizen CT-E351 Command Reference
- Citizen CT-E601 Техническое описание
- Citizen CT-E601 Руководство по эксплуатации
- Citizen CT-E601 Command Reference
- Citizen CT-E651 Техническое описание
- Citizen CT-E651 Compatible Network Cards
- Citizen CT-E651 Command Reference
- Citizen CT-E651 Руководство по эксплуатации
- Citizen CT-E651L Техническое описание
- Citizen CT-E651L Compatible Network Cards
- Citizen CT-E651L Command Reference
- Citizen CT-E651L Руководство по эксплуатации
- Citizen CT-S2000 Руководство по эксплуатации
- Citizen CT-S2000 Техническое описание
- Citizen CT-S2000 Compatible Network Cards
- Citizen CT-S2000 Command Reference