Hyundai H-CSE694 [4/11] Instruction manual

Instruction manual

will help to insure proper cutting and a good

fit. Now, mark the locations for the speakers

mounting screws, remove the panel and drill

the screw holes. When finished you may

replace the panel.

• After cutting and drilling all holes, inspect

the mounting areas for any metal burrs or

rough edges. File any area that may interfere

with the mounting of the speaker.

• Clean any metal shavings from the

mounting area and check for areas in which

water may enter the speaker cavity. Treat the

area for water protection when necessary.

Securing the speakers

• Position the speaker into the mounting

hole and reconfirm the correct mounting

location and hole placement.

• Screw clips are provided to ensure a

snug fit. These should be placed over the

metal surface and line up the hole you have

previously drilled with the screw clip. Place

the speaker into the hole, align the holes and

proceed to insert the screws. Be sure to tighten

the screws evenly so that it will not warp the

speaker frame.

• Turn your system back on and confirm

the speakers operation first at a low volume

and then you may increase the volume as you

desire.

• After installation acoustic system and

having tested it the speaker grill will have to be

inserted. Turn on you system and follow these

steps carefully:

- locate the speaker grill;

- now carefully inspect the place where the

speaker grill will be mounted – there should be

no blowholes;

- fix the speaker grill by screws.