Philips Sonicare AirFloss Pro/Ultra HX8431/02 [12/40] Auto burst function

Note: The AirFloss Ultra remembers what mode was selected last

and it is ready for the next use. If your AirFloss Ultra becomes fully

drained of power, it will go back to the triple burst default mode

once it has been recharged.

2 Place the nozzle tip between two teeth at your gum line. Slightly

close your lips over the nozzle when it is in place, to avoid

splashing. (Fig. 13)

3 Press the activation button to deliver 1-3 bursts (depending on the

selected mode) of air and micro-droplets of mouthwash or water

between the teeth. (Fig. 14)

4 Slide the nozzle tip along the gum line until you feel it settle

between the next two teeth.

5 Continue this procedure for all spaces between your teeth,

including behind your back teeth. (Fig. 15)

Note: Refill the reservoir as needed.

Auto-burst function

Hold the activation button to deliver bursts continuously,

approximately one second between set of bursts.

Automatic shut-off function

The AirFloss automatically turns off if it has not been used for one

minute.

Cleaning

If the AirFloss Ultra becomes clogged, or to clean the inside of the

AirFloss, fill the reservoir with warm water and press the activation

button until the reservoir is empty.

Do not clean the nozzle, handle or charger in the dishwasher.

Do not use cleaning agents to clean the appliance. The formulation

or strength of some agents may damage the appliance.

Handle and nozzle

1 Remove the AirFloss Ultra nozzle from the handle. Rinse the

nozzle after each use to eliminate the residue left in it. (Fig. 16)

English