Timberk T-HU3.4-A11M-SV [17/40] Appliance turning on

Содержание

IM2021 Appliance turning on Install the device true vertically on a flat dry surface then connect the device to the electric power network having previously filled the tank with water Rotate the knob of the on off and steam output intensity regulator to the rightmost position The appliance is on the indicator light is on and steam comes out of the dispenser At the very beginning of this operation the spray level may be unstable due to temperature differences and water quality It will take a short time to stabilize Steam output intensity adjustment Rotating the knob of the on off and steam output intensity regulator to the left and right you can adjust the steam intensity The more steam comes out the stronger and faster the air is humidified Comfortable conditions are achieved at relative air humidity of 40 to 60 You can determine the favorable level of humidity according to your own feelings or you can use a hygrometer not included in the scope of delivery which measures the level of relative humidity Automatic shutdown in case of water lack When the water level in the tank falls below the minimum permissible level the ultrasonic membrane of the appliance will automatically turn off and a red indicator will light up on the control panel To continue the appliance operation it is necessary to fill the reservoir with water according to Filling the tank with water section thereafter connect the appliance to the electrical power network Color lighting When the lighting is turned on different colors will change in sequence To turn on the color lighting press the lighting on off button To turn off the color lighting press the lighting on off button again Appliance turning off To turn off the appliance set the knob of the on off and steam output intensity regulator to the OFF position and the indicator light will turn off NOTE When using the air humidifier you may come across condensate formation on its upper part and things near it including water accumulation which is not a defect this is normal side effect of operation This effect may be related to several causes specified in the table Troubleshooting 9 CLEANING AND MAINTENANCE 17