Timberk T-HU3.4-A11M-SV [18/40] Before cleaning the appliance make sure it is unplugged otherwise it may result in electric shock

Содержание

IM2021 Before cleaning the appliance make sure it is unplugged Otherwise it may result in electric shock Before cleaning in order not to burn your hands wait until the water in the base of the appliance has completely cooled Use a damp and soft cloth to wipe the outside of the appliance To avoid electric shock do not scratch or damage the components of the device when cleaning Do not use solvent gasoline dimethylbenzene hard brush talcum powder and other substances when cleaning the device Wipe off any remaining water inside the base of the unit under the tank with a damp and soft cloth To remove water on small parts you can use a brush and then wipe them again with a soft cloth Clean the device once or twice a week If dirt is formed on the membrane clean it with a brush Rinse the water tank cover and nozzle carefully and effortlessly with fresh water otherwise this will cause water to leak through the cover After removing any remaining water from the surface of nozzle wipe it with a soft cloth Clean the outside of the appliance with a damp and soft cloth IMPORTANT To avoid deformation of working surfaces resulting in decreased atomizing or other malfunctions do not use metallic brushes blades or talc powder to wipe the atomizer s surface The water tank may leak after heavy impacts In case of water leakage immediately stop using the unit and contact an authorized service center To keep the unit dry wipe the water after cleaning and dry the unit s base and water tank Make sure that there is no water left inside the unit s base and water tank Before a long break in use dry the base and the tank but the tank on the base and pack the device in a plastic bag then put it in a box Store the unit in a low humidity room Storing the unit undried results in generation of mold To clean the water tank and parts of the base of the device from salt deposits use citric acid for 1 liter of hot water take 1 tablespoon of citric acid and mix well pour the solution into the tank and put it on the base of the humidifier water from the tank will automatically fall into the base of the device leave the humidifier for 10 12 hours do not turn it on after the time has passed remove the solution from the device along with the exfoliated parts of the salt coating if it is difficult to remove plaque use a special brush for the base of the humidifier if this is not supplied you can use a toothbrush For the tank pour 0 5 1 cups of dry rice into cold water or a cooled citric acid solution and shake until the plaque is peeled off rinse all internal parts of the device with cool water 18