Clevermic Duo S [22/23] Ir transfer ir pass
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Clevermic Duo S [22/23] Ir transfer ir pass

Clevermic Duo S [22/23] Ir transfer ir pass
19
VIDEO
FORMAT
1080P60
1080P25
Once selected, press OK key to
confirm.
1080P50
720P60
1080I60
720P50
1080I50
720P30
1080P30
720P25
RESET
SYS RESET
System reset
CAM RESET
Camera reset
PT RESET
Pan tilt reset
ALL RESET
All reset
IR ADDR
Camera IR control address
FOCUS
Focus mode
CLIENT
Client protocol, can’t be changed
MODEL NO.
Model number
ARM VER
ARM version
FPGA VER
FPGA version
CAM VER
Camera version
RELEASE
Software release date
IR TRANSFER(IR PASS)
1 IR transfer( IR Pass) function available by setting
the SW3 and SW4( at the bottom of the camera).
Currently the camera support NEC and SEJIN
4PPM code. For customized with other code, pls
contact us for adding:
2. Once the camera power on and finish configuration:
if set to NEC code, can enable the IR transfer function via OSD menu or via serial command.
if set non NEC code, then can enable it only via VISCA IN port.
3. Put the targeted remote controller towards to the camera IR receiver, press keys on the remote controller, then
the camera will output the received IR code via VISCA IN port.
4. IR Transfer output format: XX XX XX XX: Remote Controller Code FF: End Code
6. The camera can save all settingS, no need to re-set after power off and on.
Dial Switch（IR CODE TYPE）
SW-3
SW-4
Note
1
OFF
OFF
Off（Close IR Transfer）
2
ON
OFF
Undefined
3
OFF
ON
SEJIN 4PPM CODE
4
ON
ON
NEC CODE(standard)

Содержание

Похожие устройства

Скачать