Severin KVS2 OneTouch [23/82] Caution

Version 2 2011-12-01

3. Open the door of the brewing unit on the back side of the machine by pressing

down on the tabs with your thumbs and pulling towards you (Fig. 14).

4. Remove the door completely.

Â The brewing unit is now visible.

5. Pull the red lever of the brewing unit upwards and pull the brewing unit carefully

downwards at an angle out of the machine (Fig. 15).

6. Clean the brewing unit under running water.

CAUTION!

Incorrect handling of the brewing unit can cause water to

escape from the machine.

– Do not take the brewing unit apart or adjust it.

– Make sure that the locking lever of the brewing unit is

open when you insert it.

– Push the brewing unit carefully in from bottom to top.

7. Insert the brewing unit into the machine from behind and push it in as far as it

goes (Fig. 16).

8. Press the red lever of the brewing unit down. If the lever does not move, check

the position of the brewing unit again and re-insert it.

Â The brewing unit is now inserted correctly.

9. Close the brewing unit again with the door.

Fig. 14: Removing the cover of the brewing unit Fig. 15: Pulling out the brewing unit Fig. 16: Inserting the brewing unit