Severin KVS2 OneTouch [8/82] Switching on for the first time

Version 2 2011-12-01

5. Switching on for the rst time

When you switch your device on for the rst time, it asks you for some basic settings.

1. Plug the mains plug into the outlet.

2. Switch the device on with the on/off switch.

Â The display shows:

PLEASE SELECT LANGUAGE

3. Turn the e-Select until the desired language is shown and conrm it by pressing

the e-Select.

Â The display shows:

PLEASE SELECT WATER HARDNESS

4. Check the water hardness on a tap using the water hardness test strip. To do

this, proceed according to the enclosed description of the test strips.

5. Use the e-Select to select the water hardness and conrm your entry.

Â The display shows:

USE FILTER?

6. Rinse the water tank thoroughly with water.

7. If desired, use the insertion aid to insert the water lter into the water tank (g. 2)

and remove insertion aid again.

NOTE!

A water lter improves the water quality of the water used

by removing contaminants and scale from the water.

SEVERIN recommends the use of a water lter for high

water quality.

8. Fill the water tank with cold drinking water up to the „Max“ marking and place

it on the device. Here, make sure that the water tank hooks into the top of the

device and lies close against the device.

9. Select with the e-Select

• NO, if you do not want to use a water lter or

• YES, if you want to insert a water lter in the water tank.

Fig. 2: Inserting the water lter Fig. 3: Placement of water tank