Home
Главная
Hander
Шлифовальная Машина
HAG-1400
Инструкция по эксплуатации Страница: 4

Hander HAG-1400 [4/50] Environment

OUTDOOR USE

• Connect the tool via a fault current (FI) circuit breaker

with a triggering current of 30 mA maximum

• Only use an extension cord which is intended

for outdoor use and equipped with a splashproof

coupling-socket

BEFORE USE

• Before using the tool for the ﬁ rst time, it is

recommended to receive practical information

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Take protective measures when during work dust can

develop that is harmful to one’s health, combustible or

explosive (some dusts are considered carcinogenic);

wear a dust mask and work with dust/chip extraction

when connectable

• Be careful of hidden electrical wires or gas- and water

pipes; check the work area, for instance with a metal

detector

• Be careful when cutting grooves, especially in

supporting walls (slots in supporting walls are subject

to country- speciﬁ c regulations; these regulations are

to be observed under all circumstances)

• Clamp the workpiece in case it does not remain

stationa ry from its own weight

• Do not clamp the tool in a vice

• Use completely unrolled and safe extension cords

with a capacity of 16 Amps (UK 13 Amps)

• Wear protective glasses and gloves, hearing

protection and sturdy shoes; when necessary, also

wear an apron

• Always mount auxiliary handle

and protective

guard

; never use the tool without them

• Be sure tool is switched off when plugging in

DURING USE

• Always keep the cord away from moving parts of the

tool; direct the cord to the rear, away from the tool

• If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect the

plug; never use the tool with a damaged cord

• Push spindle-lock button

only when spindle is

at a standstill

• Keep hands away from rotating accessories

• When grinding metal, sparks are generated; keep

other persons and combustible material from work

area

• In case of electrical or mechanical malfunction,

immediately switch off the tool and disconnect the

plug

• In case the cutting disc is blocked, resulting in jerking

forces on the tool, immediately switch off the tool

• In case of current interruption or when the plug is

accidentally pulled out, unlock the on/off switch (8)

immediately and put it in the OFF-position in order to

prevent uncontrolled restarting

• Do not apply so much pressure on the tool that it

comes to a standstill

AFTER USE

• Before you put down the tool, switch off the motor

and ensure that all moving parts have come to a

complete standstill

• After switching off the tool, never stop the rotation of

the accessory by a lateral force applied against it

WHEN CONNECTING NEW 3-PIN PLUG (U.K.

ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

• If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left

unattended

Your machine is double insulated in accord-

ance with EN 50144; therefore no earthwire is

required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots

free from dust and dirt.If the dirt does not come off use

a soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water, etc.

These solvents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group

dealer. Here they will be disposed of in an environmen-

tally safe way.

Hander HAG-1400 [4/50] Environment

Содержание

Похожие устройства