Denzel DT 33 [13/95] Derzee

Содержание

Похожие устройства

DERZEE GASOLINE TRIMMER A ATTENTION Idle mode is necessary in order to reduce the temperature inside the engine Long continuous operation of the engine at FULL rpm can lead to overheating of the engine and its failure Engine failure due to overheating cannot be repaired under warranty Main types of work The main types of trimmer work are cutting mowing removing vegetation cover and treating the lawn border z LU fig 12 Triming With this type of work grass is selectively mowed in a small area by moving the trimmer in a straight line Move the trimmer carefully to the place to be cut fig 12 a Tilt the head knife a little to the side so that the waste does not fly in your direction If you areclose to the barrier fence tree wall approach it at an angle so that the waste does not ricoche in your direction Be especially careful in the immediate vicinity of a wire or wire fence Cut can be done by cutting the stems one by one Place the trimmer reel knife so that the ends of the cord knife are close to the base of the weed if you lift the cord higher the stem will swing and wind onto the reel axis Use a cutting device to remove the stems successively if necessary Land cover removal and lawn trimming When vegetation is removed after work bare ground remains Border processing is cutting grass when forming the borders of a lawn or in places where it has grown along a sidewalk or road Fig 12 g In both cases tilt the trimmer reel at a steep angle so as to prevent dirt and stones from falling into you Choose the angles that suit your size and working situation For most types of trimming trimmer coil should be tilted so that the cord ends are in contact with the surface from the side where the coil moves away from you Fig 13 Throw away waste will not fly in your direction fig 13

Скачать