Bosch GLM 50-27 CG Li-Ion [30/477] Switching on and off

30 | English

u Avoid substantial knocks to the measuring tool and avoid dropping it. After strong

external influences on the measuring tool, you should always carry out an accuracy

check(see "Accuracy Check", page34) before further work.

Switching On and Off

Press the button to switch the measuring tool and the laser on.

You can also switch on the measuring tool without the laser by pressing the button.

Press and hold the button to switch off the measuring tool.

The measured values and device settings in the memory are retained.

Measuring Process

When switching on for the first time, the measuring tool will be in the length measurement

function. When switching on every subsequent time, the measuring tool will be in the

measuring function that was last used.

Three settings are available for the reference level of the measurement. (see "Selecting

the Reference Level", page31)

Apply the measuring tool to the point at which you want to start the measurement (e.g.

wall).

If you have switched on the measuring tool with the button, then briefly press

the button to switch on the laser.

Press the button to start the measurement.

For more information, you can access the online operating instructions at

www.bosch-pt.com/manuals

The measuring tool must not be moved during a measurement (with the exception

of the continuous measurement and grade measurement functions). Therefore,

place the measuring tool, as far as this is possible, against or on a firm stop or supporting

surface.

The reception lens(15) and the laser beam output(16) must not be covered dur-

ing the measuring process.

1 609 92A 6XT | (03.09.2021) Bosch Power Tools