BLACK & DECKER CD121 [6/28] Assembly
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

BLACK & DECKER CD121 [6/28] Assembly

Black & Decker CD121 [6/28] Assembly
• This appliance is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
The charger is intended for indoor
use only.
Read this entire manual carefully
before using the appliance.
Vibration
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN 60745 and may
be used for comparing one tool with
another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
dier from the declared value depending on
the ways in which the tool is used. The
vibration level may increase above the level
stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should
consider, the actual conditions of use and
the way the tool is used, including taking
account of all parts of the operating cycle
such as the times when the tool is switched
o and when it is running idle in addition to
the trigger time.
Labels on tool
The following pictograms are shown on the
tool:
Warning! To reduce the risk of injury,
the user must read the instruction
manual.
Electrical safety
Your charger is double insulated;
therefore no earth wire is required.
Always check that the mains voltage
corresponds to the voltage on the
rating plate. Never attempt to
replace the charger unit with a
regular mains plug.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Features
This tool includes some or all of the
following features.
1. Torque adjustment collar
2. Forward/reverse slider
3. Trigger switch
4. Chuck
5. Battery release button
Assembly
Warning! Before assembly, remove the
battery from the tool.
Fitting and removing the battery (fig. A)
• To fit the battery (5), line it up with the
receptacle on the tool. Slide the battery
into the receptacle and push until the
battery snaps into place.
• To remove the battery, push the two
release buttons (6) simultaneously while
at the same time pulling the battery out
of the receptacle.
Fitting and removing a drill bit or
screwdriver bit (fig. B)
Warning! First remove the battery from the
tool.
• This tool is fitted with a keyless chuck to
allow for an easy exchange of bits.
• Lock the tool by setting the forward/
reverse slider (2) to the centre position.
6
ENGLISH
(Original instructions)

Содержание

Похожие устройства

Скачать