BLACK & DECKER CD121 [8/28] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

BLACK & DECKER CD121 [8/28] English

Black & Decker CD121 [8/28] English
ENGLISH
8
(Original instructions)
Variable speed on/o switch
• To switch the tool on, press the trigger
switch (3). When slightly pressing the
switch, the tool will run at low speed.
When pressing the switch further, the
tool will run at high speed.
• To switch the tool off, release the trigger
switch.
Hints for optimum use
Drilling
• Always apply a light pressure in a straight
line with the drill bit.
• Just before the drill tip breaks through
the other side of the workpiece, decrease
pressure on the tool.
• Use a block of wood to back up
workpieces that may splinter.
• Use spade bits when drilling large
diameter holes in wood.
• Use HSS drill bits when drilling in metal.
• Use masonry bits when drilling in soft
masonry.
• Use a lubricant when drilling metals other
than cast iron and brass.
• Make an indentation using a centre
punch at the centre of the hole to be
drilled in order to improve accuracy.
Screwdriving
• Always use the correct type and size of
screwdriver bit.
• If screws are difficult to tighten, try
applying a small amount of washing
liquid or soap as a lubricant.
• Always hold the tool and screwdriver bit
in a straight line with the screw.
Maintenance
Your BLACK+DECKER tool has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Your charger does not require any
maintenance apart from regular cleaning.
Warning! Before performing any
maintenance on the tool, remove the battery
from the tool. Unplug the charger before
cleaning it.
• Regularly clean the ventilation slots in
your tool and charger using a soft brush
or dry cloth.
• Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
• Regularly open the chuck and tap it to
remove any dust from the interior.
Protecting the environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Reuse of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of
their working life. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your
local BLACK+DECKER office at the address
indicated in this manual. Alternatively, a list
of authorised BLACK+DECKER repair agents
and full details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com.

Содержание

Похожие устройства

Скачать