Makita DSL800Z без акк. и з.у — инструкция по эксплуатации инструмента с защитой от перегрузки [13/92]
Макгруп McGrp.ru

Makita DSL800Z без акк. и з.у — инструкция по эксплуатации инструмента с защитой от перегрузки [13/92]

Превью страниц Страница 13 / 92
Makita DSL800Z без акк. и з.у [13/92] Tool battery protection system
13 ENGLISH
NOTE: Depending on the conditions of use and the
ambienttemperature,theindicationmaydifferslightly
fromtheactualcapacity.
Tool / battery protection system
Thetoolisequippedwithatool/batteryprotectionsys-
tem.Thissystemautomaticallycutsoffpowertothe
motortoextendtoolandbatterylife.Thetoolwillauto-
maticallystopduringoperationifthetoolorbatteryis
placedunderoneofthefollowingconditions:
Overload protection
Whenthetoolorbatteryisoperatedinamannerthat
causesittodrawanabnormallyhighcurrent,thetool
automaticallystopsandthelampblinks.Inthissit-
uation, turn the tool off and stop the application that
causedthetooltobecomeoverloaded.Thenturnthe
tool on to restart.
Overheat protection
Whenthetoolorbatteryisoverheated,thetoolstops
automaticallyandthelamplightsup.Inthiscase,letthe
toolandbatterycoolbeforeturningthetoolonagain.
Overdischarge protection
Whenthebatterycapacityisnotenough,thetoolstops
automatically.Inthiscase,removethebatteryfromthe
toolandchargethebattery.
Switch action
CAUTION: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
CAUTION: Switch can be locked in "ON" posi-
tion for ease of operator comfort during extended
use. Apply caution when locking tool in "ON"
position and maintain rm grasp on tool.
CAUTION: Do not install the battery cartridge
with the lock button engaged.
CAUTION: When not operating the tool,
depress the trigger-lock button from side to
lock the switch trigger in the OFF position.
►Fig.3: 1.Trigger-lockbutton
►Fig.4: 1. Switch trigger 2.Lockbutton3. Trigger-
lockbutton
Topreventtheswitchtriggerfromaccidentallypulled,
thetrigger-lockbuttonisprovided.Tostartthetool,
depressthetrigger-lockbuttonfromA(
) side and pull
the switch trigger. Release the switch trigger to stop.
Afteruse,depressthetrigger-lockbuttonfromB(
)
side.
Forcontinuousoperation,depressthelockbuttonwhile
pulling the switch trigger, and then release the switch
trigger.Tostopthetool,pulltheswitchtriggerfully,then
release it.
Speed adjusting dial
►Fig.5: 1.Speedadjustingdial
Therotationspeedofthetoolcanbechangedbyturn-
ingthespeedadjustingdial.Thetablebelowshows
thenumberonthedialandthecorrespondingrotation
speed.
Number Speed
1 1,000 min
-1
2 1,200 min
-1
3 1,400 min
-1
4 1,600min
-1
5 1,800 min
-1
NOTICE: When changing the speed dial from "5"
to "1", turn the dial counterclockwise. Do not turn
the dial clockwise forcibly.
Overload and overheat indicator
lamp
►Fig.6: 1. Indicator lamp
If the tool is operated with excessive load, the tool stops
automaticallyandtheindicatorlampblinksinred.Inthis
case, reduce the load on the tool.
Ifthetoolisoverheated,thetoolstopsautomatically
and the indicator lamp lights up in red. In this case, let
thetoolcooldownbeforeturningthetoolonagain.
Electronic function
Thetoolsequippedwithelectronicfunctionareeasyto
operatebecauseofthefollowingfeatures.
Constant speed control
Possibletogetnenish,becausetherotatingspeedis
kept constant even under the loaded condition.
Soft start feature
Softstartbecauseofsuppressedstartingshock.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Assembling the tool bag
1. Takeoutthetoolandthetoolbagfromthebox.
►Fig.7
2. Unfoldthetoolbag.
►Fig.8: 1.Toolbag
3. Inserttheinnertrayintothetoolbag,andthenx
theinnertraywithhookandloopfastenerasshownin
thegure.
►Fig.9: 1. Hook and loop fastener 2.Innertray

Содержание

520

Похожие устройства

Узнайте, как правильно использовать инструмент с защитой от перегрузки, перегрева и разряда. Обеспечьте безопасность и долговечность вашего оборудования.

Google Play RuStore