Makita DSL800Z без акк. и з.у [14/92] Operation
Макгруп McGrp.ru

Makita DSL800Z без акк. и з.у [14/92] Operation

Превью страниц Страница 14 / 92
Makita DSL800Z без акк. и з.у [14/92] Operation
14 ENGLISH
Installing the abrasive disc
►Fig.10: 1.Abrasivedisc2. Pad
Removeanydirtorforeignmatterfromthepad,and
thenattachtheabrasivedisctothepadwhilealigning
theholesintheabrasivediscwiththoseinthepad.
Adjusting the pipe length
CAUTION: When adjusting the pipe length,
hold the tool horizontally. Otherwise, the pipe
lengthmaychangeunintentionallyanditmaycause
aninjuryormalfunctionofthetool.
NOTICE: Do not extend the pipe beyond the
limit.Failuretodosomaycauseamalfunctionof
the tool.
►Fig.11: 1. Sleeve 2. Pipe
Toadjustthepipelength,loosenthesleeve,thenadjust
the length of the pipe, and then tighten the sleeve.
Installing or removing the dust
collection brush
Before sanding operation, install the dust collection
brushtothesandingheadasshowninthegure.
►Fig.12: 1.Dustcollectionbrush2. Sanding head
Youcanremovethedustcollectionbrushforoperation
alongtheedgeofwallorceiling.Theremovedbrush
canbeattachedtothesandingheadasshowninthe
gure.
►Fig.13: 1.Dustcollectionbrush2. Sanding head
Hex wrench storage
►Fig.14: 1. Hex wrench
When not in use, store the hex wrench as shown in the
guretokeepitfrombeinglost.
Installing or removing the pad
►Fig.15: 1. Hex wrench 2. Bolt 3. Pad
Toremovethepad,removetheabrasivediscfromthe
pad,andthenturntheboltcounterclockwisewithahex
wrench. To install the pad, perform the removal proce-
dure in reverse.
CAUTION: Make sure that the pad is secured
properly.Looseattachmentwillrunoutofbalance
andcauseanexcessivevibrationwhichmaycause
loss of control.
Connecting a vacuum cleaner
Optional accessory
Whenyouwishtoperformoperationcleanly,connecta
Makitavacuumcleanertoyourtool.Connectahoseof
the vacuum cleaner to the dust nozzle using the front
cuff 24.
►Fig.16: 1. Hose of the vacuum cleaner 2.Frontcuff
24 3. Dust nozzle
Installing or removing the extension handle
Optional accessory
To install the extension handle, attach the extension handle to the
toolandsecureitwiththeknobrmly.Besuretoinserttheend
of the tool into the holder of the extension handle. To remove the
extension handle, perform the installation procedure in reverse.
►Fig.17:
1.Extensionhandle2.Knob3. Holder 4.Endoftool
OPERATION
CAUTION: Only use Makita genuine pads for
sanding (optional accessories).
CAUTION:
Make sure the work material is secured
and stable. Falling object may cause personal injury.
CAUTION: Hold the tool rmly with one hand
on the switch handle and the other hand on the
front grip when operating the tool.
CAUTION:
Do not run the tool at high load over
an extended time period.Itmayresultintoolmalfunction
whichcauseselectricshock,reand/orseriousinjury.
CAUTION:
Be careful not to touch the rotating part.
NOTICE: Never force the tool. Excessivepressure
mayleadtodecreasedsandingefciency,damaged
pad, or shorten tool life.
NOTICE: Continuous operation at high speed
may damage work surface.
1.
Positionthetoollightlyagainsttheworksurface.Applylight
pressure enough to align the sanding head with the work surface.
2.
Applyadditionalpressuretoengagethepadonthe
work surface. Move the tool in an overlapping pattern in
constantmotiontosmooththedrywallcompound.
►Fig.18
Operating the tool with the
extension handle
Optional accessory
CAUTION:
Hold the tool rmly with one hand on the
switch handle and the other hand on the extension handle
when operating the tool with the extension handle.
1.
Wearthebeltfortheextensionhandleasshowninthegure.
►Fig.19: 1. Belt
2. Attachtheholdertothebelt.
►Fig.20: 1. Holder 2. Belt
3. Put the end of the extension handle into the holder
to support the tool.
►Fig.21: 1.Endofextensionhandle2. Holder
Operatethetoolinthesamewayasthetoolwithoutthe
extension handle.
►Fig.22
Youcanalsooperatethetoolwithoutusingthebeltand
theholderasshowninthegure.
►Fig.23

Содержание

520

Похожие устройства

Google Play RuStore