Comprag ACP-2 [6/56] Safety measures for maintenance and repair

CONTRACOR

Version 2.2

ENGLISH

Only use the equipment with a standard power voltage. Over- or undervoltage can reduce

the service life of the product. A voltage regulator should be used for the equipment if it is

operated with undervoltage or overvoltage.

1.5 Safety measures for maintenance and repair

Using the equipment for non-designated purpose, making structural changes or not

following the operating instructions may lead to severe injury or death.

- Structural changes to the equipment are prohibited - the guarantee does not apply to

modied equipment;

- Only the original spare parts and ancillary items may be used;

- All maintenance work must be performed while the equipment is turned off, disconnected

from the power source, with compressed-air hoses disconnected from the equipment, and

with the use of protective glasses.

- Never leave tools, components, rags, cloths, clothing etc. within the equipment after

completing maintenance work.

- Flammable solvents must not be used for cleaning the equipment;

- Welding or metalwork must not be carried out in the vicinity of the equipment.

Upon completing maintenance work or repairs, ensure that the working pressure and

temperature correspond to the nominal values.

ATTENTION!

The ACE aftercooler should only be turned on/off using the motor starter.

Moving the equipment while it is being operated is prohibited.

Equipment is not allowed to be moved using its wheels at speeds greater

than 20 km/h.