Contracor BRS-5 Руководство по эксплуатации онлайн [8/88] 689108

CONTRACOR

Version 2.0

7. When carrying out installation and repair work, an information plate should be afxed to

the control panel to warn against unauthorised start-up. For example, “Do not turn on.

Personnel operating!”

8. The operator remotely controlling equipment must ensure that no installation or other

work is being performed with the equipment at that moment! An information plate must

be af ed to the equipment in relation to this: See 1.3.9.

9. Maintain cleanliness in the facility where the equipment is installed. Close open inlets and

outlets during installation with dry clothes or paper to prevent rubbish entering the equipment.

10. Welding or other similar operations must not be carried out in the immediate vicinity of

the equipment and vessels under pressure.

11. If there is any suspicion of overheating, combustion or other emergency, turn off the equip-

ment. Immediately disconnect it from the power supply. Do not open the doors of equipment

until the temperature falls to room temperature, in order to prevent burns or injury.

12. Naked s must not be used as a light source for inspecting and checking equipment.

13. Never use caustic solvents, which may damage materials of the pneumatic system

14. After performing installation or other work, ensure that no instruments, rags or spare

parts have been left inside the equipment.

15. Before beginning work in normal mode after maintenance or repair work, check that the

working pressure, temperature and other characteristics are correctly set. Ensure that all

control devices are installed and functioning properly.

16. When replacing  ers, separators etc., wipe away dust, dirt and oil residue from the area

where they are installed with a dry cloth.

17. Protect the motor, air  er, electrical components and control components etc. from

coming into contact with condensate. For instance, blow down with dry air. Use protective

gloves during installation and repair work in order to avoid burns and injury (for instance,

during oil change).