Karcher SE 4001 [14/202] Start up

Karcher SE 4001 [14/202] Start up
– 3
When you unpack the system, check that
everything is complete.
If there are any missing parts or you detect
any transport damage when unpacking,
please inform your dealer immediately.
Note: The front cover pages include pic-
tures of the appliance and its operation.
Please unfold these first.
Illustration
1 Motor casing
2 Carrying handle
3 Foam filter
4 Filter lock
5 Power cord with plug
6 Storage, power cord
7 Switch for suction (0 / I)
8 Switch for spraying (0 / I)
9 Release, fresh water reservoir
10 Fresh water tank
11 Container
12 Swivel casters
13 Connection for suction hose of the wet/
dry vacuum cleaner
14 Connection, spray hose
15 Suction hose
16 Handle
17 Surrounding air separator
18 Spray handle with spray lever
19 Spray hose, loose
20 Mounting clips (10x)
21 Suction tubes 2 x 0.5 m
22 Storage for suction tubes and accesso-
ries
23 Wash nozzle for carpet cleaning, with
hard surface attachment
Attachment for wet/dry vacuuming
24 Floor nozzle with hard surface insert
25 Crevice nozzle
26 Upholstery nozzle
27 Filter bag
Illustration
Remove the fresh water reservoir.
Press the release and remove the tank.
Note: The motor casing can only be re-
moved if the fresh water reservoir was
removed first.
Illustration
Remove the motor casing. For this,
fold the carrying handle forward to un-
latch the reservoir. Remove the acces-
sories and swivel casters from the
reservoir.
Illustration
Turn the container, press in the swivel
casters in the openings at the base of
the container till the end-point.
Illustration
Turn the motor casing around and at-
tach the foam filter to the filter basket.
Insert the filter cover and turn to lock.
Install the motor casing. Pull up on
the carrying handle to lock.
Illustration
Install the fresh water reservoir. In-
sert the bottom part first and then press
toward the top on the motor compart-
ment to check if it is locked in.
Illustration
Slide the spray handle onto the handle
until it locks into place.
Attach the spray hose of the spray han-
dle to the suction hose using 8 mount-
ing clips.
Attach the suction hose and the spray
hose to the connectors on the appliance.
Note: Press the suction hose tightly into
the connector to lock it into place.
Illustration
Connect the suction pipes and attach to
the handle.
Insert the loose spray hose in the spray
handle and attach to the suction pipes
using the 2 included mounting clips.
Start up
Description of the Appliance
Before Startup
14 EN

Содержание

Скачать