Bosch BCH 6ATH25 [37/106] After using the appliance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch BCH 6ATH25 [37/106] After using the appliance

Bosch BCH 6ATH25 [37/106] After using the appliance
35
Power level 2 2
Vacuuming at normal power and with the electric
brush switched on.
For normal cleaning tasks on all floors at an average
run time.
Turbo level Turbo
Vacuuming at full power and with the electric brush
switched on.
For particularly demanding cleaning tasks on all sur-
faces (carpets, in particular) and when using an op-
tional accessory. The appliance achieves a shorter
run time at this level.
Fig.
7
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this, tilt
the vacuum cleaner forwards slightly in the direction
of the nozzle.
!
Caution: When the appliance is left standing, it must
be switched off, because if the brush is turning while
the appliance is standing still, it could cause damage
to the floor covering.
Vacuuming with accessories
Fig.
8*
a) Plug the accessory adapter into the hand vacuum clea-
ner and lock into place.
To release the accessory adapter, press the release
button and pull out the accessory adapter.
b) Fasten the carrying strap to the handle. When doing so,
lay down the appliance; do not rest it on the adapter
or the hose.
Fig.
9*
Fit nozzles as required to the flexible hose with the ac-
cessory adapter handle:
Upholstery nozzle for vacuuming upholstered furni-
ture, curtains, etc.
Crevice nozzle for vacuuming crevices and corners,
etc.
After using the appliance
Fig.
10
Switch off the appliance after vacuuming.
Emptying the dust container
Fig.
11
In order to achieve the best possible vacuuming re-
sults, the dust container should be emptied after every
use or, at the latest, when dust at one point in the dust
container has reached the marking.
We recommend that you not fill the dust container bey-
ond the marking, as this leads to considerable soiling
of the filter.
When emptying the dust container, always check how
dirty the outer filter unit is and, if necessary, clean it as
detailed in the "Cleaning the outer filter unit" instruc-
tions.
Fig.
16
!
Caution: The filter can only be cleaned if the appli-
ance is switched off.
Never vacuum without the outer filter unit and its
fitted filter cartridge.
Fig.
12
Using the release button, unlock the dust container
and remove it from the appliance.
Fig.
13
Take the filter unit out of the dust container.
Empty the dust container.
Fig.
14
Remove any dirt which may have been lodged under-
neath the container ejector opening.
Insert the filter unit into the dust container, making
sure it is correctly seated.
Insert the dust container in the appliance, so that it
'clicks' audibly into place.
!
Caution: If you notice any resistance when inserting
the dust container, check that the filter is complete
and that the filter unit and dust container are correct-
ly seated.
Filter care
!
Caution: The filter can only be cleaned if the appli-
ance is switched off.
Your appliance is equipped with a "Sensor Control"
function.
This function constantly monitors whether your vacu-
um cleaner is working at its optimum power level. The
indicator light lets you know when you need to clean
the filter cartridge, so that the appliance can reach its
optimum power level once more.
Fig.
15
Sensor Control
The indicator lights up blue or is off when the appli-
ance is working at its optimum level. Once the indica-
tor turns red and flashes, the outer filter unit and filter
cartridge must be cleaned.
The appliance is automatically adjusted to power level
1.
* Depending on model

Содержание

Похожие устройства

Power level 2 2 Vacuuming at normal power and with the electric brush switched on For normal cleaning tasks on all floors at an average run time Turbo level Turbo Vacuuming at full power and with the electric brush switched on For particularly demanding cleaning tasks on all sur faces carpets in particular and when using an op tional accessory The appliance achieves a shorter run time at this level dirty the outer filter unit is and if necessary clean it as detailed in the Cleaning the outer filter unit instruc tions Fig EQ Caution The filter can only be cleaned if the appli ance is switched off Never vacuum without the outer filter unit and its fitted filter cartridge Fig EH Using the release button unlock the dust container and remove it from the appliance Fig EH Fig El During short pauses in vacuuming the appliance can be left standing anywhere in the room To do this tilt the vacuum cleaner forwards slightly in the direction of the nozzle Caution When the appliance is left standing it must be switched off because if the brush is turning while the appliance is standing still it could cause damage to the floor covering Take the filter unit out of the dust container Empty the dust container Fig EQ Remove any dirt which may have been lodged under neath the container ejector opening Insert the filter unit into the dust container making sure it is correctly seated Insert the dust container in the appliance so that it clicks audibly into place Vacuuming with accessories Fig 13 a Plug the accessory adapter into the hand vacuum clea ner and lock into place To release the accessory adapter press the release button and pull out the accessory adapter b Fasten the carrying strap to the handle When doing so lay down the appliance do not rest it on the adapter orthe hose Fig E3 Fit nozzles as required to the flexible hose with the ac cessory adapter handle Upholstery nozzle for vacuuming upholstered furni ture curtains etc Crevice nozzle for vacuuming crevices and corners etc After using the appliance Fig EU Switch off the appliance after vacuuming Caution If you notice any resistance when inserting the dust container check that the filter is complete and that the filter unit and dust container are correct ly seated Filter care Caution The filter can only be cleaned if the appli ance is switched off Your appliance is equipped with a Sensor Control function This function constantly monitors whether your vacu um cleaner is working at its optimum power level The indicator light lets you know when you need to clean the filter cartridge so that the appliance can reach its optimum power level once more Fig EH Sensor Control The indicator lights up blue or is off when the appli ance is working at its optimum level Once the indica tor turns red and flashes the outer filter unit and filter cartridge must be cleaned Emptying the dust container Fig EH The appliance is automatically adjusted to power level 1 In order to achieve the best possible vacuuming re sults the dust container should be emptied after every use or at the latest when dust at one point in the dust container has reached the marking We recommend that you not fill the dust container bey ond the marking as this leads to considerable soiling of the filter When emptying the dust container always check how Depending on model

Скачать