Philips SRU5110 [4/73] Testing the remote control

Philips SRU5110 [4/73] Testing the remote control
2.2 Testing the remote control
The remote control has been programmed to operate the most-used
functions of almost any brand of TV. Because the SRU 5110 may use
different signals for each brand and even for different models of the same
brand, it is advisable to test whether your device responds to the
SRU 5110.The example below instructs you how to do this.
Turn your TV on manually or use the original remote control.
Tune to channel 1.
Check whether all the keys are working.
For an overview of the keys and their functions see
‘3. Keys and functions’.
If the TV responds as it should to all of the key commands the SRU 5110
is ready for use.
Tip
If the TV does not respond at all or not to all of the key commands, follow
the instructions under ‘2.3 Setting the remote control’, or for online setup go
to: www.philips.com/urc.
2.3 Setting the remote control
This is only necessary if your TV does not respond to the SRU 5110.
If that is the case, the SRU 5110 does not recognize the brand and/or
model of your TV and you need to program the remote control to do so.
Turn on the TV manually or use the original remote control.Tune in
to channel 1.
Look up the brand of your TV in the code list at the back of this
manual.A four-figure code is shown for each brand.
Note the code for your brand.
3
3
2
1
2
2
2
1
4 Installing the remote control
ENGLISH

Содержание

Похожие устройства

2 2 Testing the remote control ENGLISH The remote control has been programmed to operate the most used functions of almost any brand of TV Because the SRU 5110 may use different signals for each brand and even for different models of the same brand it is advisable to test whether your device responds to the SRU 5110 The example below instructs you how to do this Turn yourTV on manually or use the original remote control Tune to channel 1 Check whether all the keys are working 2 For an overview of the keys and their functions see 3 Keys and functions If the TV responds as it should to all of the key commands the SRU 5110 is ready for use O Tip If the TV does not respond at all or not to all of the key commands follow the instructions under 2 3 Setting the remote control or for online setup go to www philips com urc 2 3 Setting the remote control This is only necessary if yourTV does not respond to the SRU 5110 If that is the case the SRU 5110 does not recognize the brand and or model of yourTV and you need to program the remote control to do so Turn on the TV manually or use the original remote control Tune in to channel 1 Look up the brand of yourTV in the code list at the back of this manual A four figure code is shown for each brand Note the code for your brand 4 Installing the remote control

Скачать