Electrolux EKK 603504 X [9/88] The gas burner controls

Electrolux EKK 603504 X [9/88] The gas burner controls
electrolux 9
Control knobs on the gas hob
The knobs for using the gas hob of
the cooker are found on the control
panel. The regulation knobs could be
turned in anti-clockwise direction until
the small flame symbol, and vice-versa
for the larger symbol.
z No gas supply
Maximum gas supply
Minimum gas supply
To light a burner:
1. press the ignition switch marked by
a small spark ( );
2. push the relevant control knob in
completely and turn it anticlockwise
to the maximum position ( );
3. upon ignition, keep the knob pushed
down for about 5 seconds. This will
allow the safety device ("thermocou-
ple" - see figure, letter D) to be
heated and the safety device to be
switched off, otherwise the gas sup-
ply would be interrupted;
4. then, check the flame is regular and
adjust it as required.
If the burner does not ignite, turn the
control knob to zero, and try again.
If after a few attempts the burner
does not ignite, check that the burner
cap and crown (see figure, letter A, B)
are correctly positioned.
To interrupt the supply of gas, turn
the knob in a clockwise direction to the
position "z".
Do not keep the control knob
pressed for more than 15
seconds. If the burner does
not light even after 15 seconds,
))
))
)
A - Burner Cap
B - Burner crown
C -Spark generator
D -Thermocouple
The gas burner controls

Содержание

Похожие устройства

Скачать