Home
Главная
Skil
Перфораторы
1743 LA
Инструкция по эксплуатации Страница: 9

Skil 1743 LA Инструкция по эксплуатации онлайн [9/120] 92488

c) Disconnecttheplugfromthepowersourceand/or

thebatterypackfromthepowertoolbeforemaking

anyadjustments,changingaccessories,orstoring

powertools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Storeidlepowertoolsoutofthereachofchildren

anddonotallowpersonsunfamiliarwiththepower

toolortheseinstructionstooperatethepowertool.

Power tools are dangerous in the hands of untrained

users.

e) Maintainpowertools.Checkformisalignmentor

bindingofmovingparts,breakageofpartsandany

otherconditionthatmayaffectthepowertool’s

operation.Ifdamaged,havethepowertoolrepaired

beforeuse. Many accidents are caused by poorly

maintained power tools.

f) Keepcuttingtoolssharpandclean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Usethepowertool,accessoriesandtoolbitsetc.,in

accordancewiththeseinstructions,takinginto

accounttheworkingconditionsandtheworktobe

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

5)SERVICE

a) Haveyourpowertoolservicedbyaqualifiedrepair

personusingonlyidenticalreplacementparts. This

will ensure that the safety of the power tool is maintained.

SAFETYINSTRUCTIONSFORHAMMERS

GENERAL

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• This tool should not be used by people under the age of

16 years

• Donotworkmaterialscontainingasbestos (asbestos

is considered carcinogenic)

• Never use the tool when cord is damaged; have it

replaced by a qualied person

• Alwaysdisconnectplugfrompowersourcebefore

makinganyadjustmentorchanginganyaccessory

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

BEFOREUSE

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Securetheworkpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• Usesuitabledetectorstofindhiddenutilitylinesor

callthelocalutilitycompanyforassistance (contact

with electric lines can lead to re or electrical shock;

damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wearadustmaskandworkwithadust

extractiondevicewhenconnectable

• Certain kinds of dust are classied as carcinogenic (such

as oak and beech dust) especially in conjunction with

additives for wood conditioning; wearadustmaskand

workwithadustextractiondevicewhen

connectable

• Follow the dust-related national requirements for the

materials you want to work with

DURINGUSE

• Wearearprotectors (exposure to noise can cause

hearing loss)

• Useauxiliaryhandle(s),ifsuppliedwiththetool

(loss of control can cause personal injury)

• Holdpowertoolbyinsulatedgrippingsurfaces,

whenperforminganoperationwherethecutting

accessorymaycontacthiddenwiringoritsown

cord (a cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live” and

could give the operator an electric shock)

• Always keep the cord away from moving parts of the tool

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

• If the drill bit becomes unexpectedly jammed (causing a

sudden, dangerous reaction), immediately switch o the

tool

• Be aware of the forces that occur as a result of jamming

(especially when drilling metals); alwaysuseauxiliary

handleH2 and take a secure stance

AFTERUSE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• On/o 4

• Switch locking for continuous use 5

• Speed control for smooth starting 6

• Maximum speed control 7

With wheel B 2 the maximum speed can be adjusted

steplessly from minimum to maximum

• Changing direction of rotation 8

- when not properly set in left/right position, switch A

cannot be activated

- the tool functions at limited speed when set for left

rotation

! changedirectionofrotationonlywhentoolisata

completestandstill

Skil 1743 LA Инструкция по эксплуатации онлайн [9/120] 92488

Содержание

Похожие устройства