Falmec PIANO INDUZIONE P01F8840.00#ZZZN400F [20/100] What to do in case of cookers problems

Falmec PIANO INDUZIONE P01F8840.00#ZZZN400F [20/100] What to do in case of cookers problems
20
- The cooking area display indicates the activation of the function
Function duration table:
Power level
Automatic heating function time
(seconds)
148
2 144
3 230
4 312
5 408
6 120
7 168
8 210
9 Function not available
P Function not available
- When the time elapses, the function ends and the cooking area is reset to
the previously set power level.
To deactivate the AUTOMATIC HEATING function:
1 - Wait for the end of the function time
or
2 - Press the cooking area key for 3 seconds
- the function ends and the cooking area is reset to the previously set
power level.
or
3- If a lower power level is set than before the automatic heating function, the
function is deactivated.
RECALL FUNCTION:
enables the recovery of cooking settings prior to an accidental cooker
top switch-o.
- Perform the following steps within 6 seconds of an accidental switch-o
- Turn on the cooker top
- The pause key ashes
- Press the pause key
The RECALL function resets the operation of the cooking areas, timer fun-
ctions and quick heating. Other functions will not be restored.
WHAT TO DO IN CASE OF COOKERS PROBLEMS
The cooker or cooking areas do not turn on:
The cooker is not connected to the electric network.
The protection fuse is released.
Check if the block is not active.
Keys are covered with water or grease.
An object is placed on the keys.
The symbol is displayed .
There is no saucepan on the cooking area.
The container used is not compatible with cooktops.
The diameter of the saucepan bottom is too small compared to the
cooking area.
The symbol [E] is displayed:
Disconnect and connect the cooker.
Contact the after-sales centre.
One of the area or the entire cooker turns o:
The safety overheating system is active;
The cooker or one cooking area remains on for too long;
one or more keys are covered;
one of the saucepans is empty and the bottom overheated.
The fan keeps on working after the cooker shutdown:
This is not a malfunction: the fan keeps on protecting the electronic
power unit of the device.
The fan stops automatically.
COOKERS ERROR CODES
In case of error, the device displays error codes for support purposes.
The display of the cooking area shows the error code alternating 'E' with
other symbols and numbers.
Error
code
Description Possible
causes
Solution
+
+ 0 + 3
Continuous acti-
vation of a key
- Metal objects
above the
keyboard
- water over the
keyboard
- Move the metal
objects
- Dry the water
+
+ 2 + 1
Internal tempera-
ture above 85°C
- covered or
insucient ven-
tilation areas
- Allow internal heat
dissipation
+
+ 3 + 1
Incorrect congu-
ration
- conguration
error
- Contact Technical
Supportstenza
tecnica
+
+ 4 + 2
Internal supply
voltages too high
or low
Overcharging
due to atmo-
spheric dischar-
ge, electrical
system failure or
incorrect power
connection
- Contact Technical
Support
+
+ 4 + 7
No communi-
cation between
keyboard and
inductor modules
- Communi-
cation cable
damaged or
disconnected
- Damaged in-
ductor module
- Contact Technical
Support
+
+ 2 + 0
+
+ 2 + 2
+
+ 3 + 5
+
+ 3 + 6
Control keyboard
internal error
- Contact Technical
Support
+ 2
Temperature limi-
ts were exceeded
in the cooking
area
- Empty sauce-
pan
- unsuitable
saucepan type
- saucepan or
glass too hot
- ll the saucepan
- use a suitable
saucepan
- remove the sauce-
pan and allow the
area to cool down
+ 3
Unsuitable sau-
cepan
- The saucepan
has little ferritic
material
- The saucepan
caused an error
in the inductor
module
- Inductor
failure
- Use a suitable
saucepan
- Remove the sauce-
pan, wait 8 seconds
and try again
- Contact Technical
Support
+ 4
Incorrect congu-
ration
- inductor con-
guration error
- Contact Technical
Support
+ 5
No communi-
cation between
keyboard and
generator
- Faulty or
disconnected
LIN cable
- Incorrect
electrical con-
nection
- Internal fault
- Conguration
error
- Contact Technical
Support
- Check terminal
board electrical
connection
- Contact Technical
Support
- Contact Technical
Support

Содержание

Скачать