Falmec PIANO INDUZIONE P01F8840.00#ZZZN400F [21/100] English

Falmec PIANO INDUZIONE P01F8840.00#ZZZN400F [21/100] English
21
ENGLISH
+ 6
Incorrect power
supply
- Out-of-range
supply voltage
- Incorrect
supply voltage
frequency
- Inductor
failure
- Check that the
supply voltage is
correct: voltage and
frequency.
- Contact Technical
Support
+ 7
Internal inductor
failure
- Contact Technical
Support
+ 8
Cooling fan not
working
- Dirty fan
- Fan Failure
- Clean the air vents
- Contact Technical
Support
+ 9
Faulty inductor
temperature
probe
- Faulty inductor
temperature
probe
- Contact Technical
Support
+
Internal inductor
failure
- Contact Technical
Support
+
Inductor tempe-
rature probe has
a xed value
- glass too hot
- faulty probe
- Cool the glass
- Contact Technical
Support
Note:
Not each failure can be delected automatically by the system, e.g. in case of
defect of the User interface power supply.
OPERATION
WHEN TO TURN ON THE HOOD?
Switch on the hood at least one minute before starting to cook to direct fumes
and vapours towards the suction surface.
After cooking, leave the hood operating until complete extraction of all vapours
and odours. By means of the Timer function, it is possible to set auto switch-off
function which will allow the hood to turn off automatically after 15 minutes of
operation.
WHICH SPEED IS TO BE SELECTED?
speed (1): maintains the circulation of clean air with low electricity consump-
tion.
speed (2): normal conditions of use.
speed (3): presence of strong odours and vapours.
speed (4): rapid disposal of odours and vapours.
HOOD TOUCH PUSHBUTTON PANEL
ON/OFF
Short pulse: Hood switch ON/OFF
Long pulse: Hood operation automatic cycle activation (A) accor-
ding to plate power.
Increase speed from 1 to 4
Speed 4 is only active for a few
minutes
The speeds are indicated by the
LEDs on the keys:
Speed 1
Speed 2
Speed 3
Speed 4
("+" LED flashing)
Reduce speed from 4 to 1
Light on/o
Short impulse: turn on and off
Long impulse: see hood manual
TIMER (red LED flashing)
Auto switch-off after 15 min.
The function deactivates (red LED off) if:
- The TIMER key (
) is pressed again.
- The ON/OFF key (
) is pressed.
If the pushbutton panel is completely inactive, before contacting
the Technical assistance service, disconnect power temporarily to
the appliance (about 5“), possibly by acting on the main switch, to
restore normal operation. If this measure has no eect, contact the Techni-
cal assistance service.
TOP-HOOD SYNCHRONISATION:
- WITHOUT REMOTE CONTROL
- Press the association key in the hood (see hood manual)
- Press the
key on the cooker top
- WITH REMOTE CONTROL
- Assign the radio control to the hood as per the hood instructions
- Press the
key on the cooker top until the digital dot on the display starts
flashing
- Press any key on the remote control. The cooker top stores the same code as
the remote control.
- The hood can be controlled from both the remote control and the cooker top.
CREATE A NEW CODE
- The procedure must be carried out on the cooker top
- Press
+ until the display shows flashing
- Press the
key for a few seconds.
- To couple the hood, repeat the SYNCHRONISATION procedure
RESTORING DEFAULT CODE
- The procedure must be carried out on the cooker top
- Press
+ until the display shows flashing
- Press the + key for a few seconds.
- To couple the hood, repeat the SYNCHRONISATION procedure

Содержание

Скачать