SNR SR2212RS — понимание режимов дисков RAID: Unconfigured Good, Bad и JBOD [131/195]

Превью страниц Страница 131 / 195

➢

Common task switching disk mode:

The RAID card supports switching between the following three disk modes.

Unconfigured Good: indicates that the physical disk is normal and can be used to configure RAID or

hot spare disks.

Unconfigured Bad: It means that there is residual RAID information on the physical disk, which needs

to be cleared manually.

JBOD: Just a Bunch Of Disks, only connect the disks in series to expand the capacity, but does not

have the RAID function.

Here is an example of switching from Unconfigured Good mode to Unconfigured Bad mode.

a) As shown in Figure 6-26, select Drive Management on the RAID card configuration interface and press Enter.



Figure 6-26 RAID card configuration interface

Figure 6-26

Enter the interface shown in Figure 6-27, select the disk to be configured, and press Enter.



Figure 6-27 Drive Management management interface

Figure 6-27

Enter the interface shown in Figure 6-28, select Operation, press Enter, and then select Make

Unconfigured Bad in the pop-up dialog box, and press Enter.



Figure 6-28 Operation interface