SNR SR2212RS — настройка сетевых портов BMC: пошаговое руководство [186/195]

Превью страниц Страница 186 / 195

After entering this interface, enter the BMC network configuration option through the keyboard, and you

will enter the following interface, as shown in Figure 7-5.

Figure 7-5 BMC network configuration option interface

On this page, you can see two configurable network ports, one is Dedicated dedicated network port, and

the other is Sharelink shared network port. Take the shared network port as an example here. If you connect

a dedicated network port, the setting method is the same as the shared network port. Switch to the

Configuration Address Source option and press Enter to set the network mode of changing the network port,

as shown in Figure 7-6.

Figure 7-6 Configure network port network mode

There are four network modes that can be configured on this interface, namely Unspecified, Static,

DynamicBMCDHCP, DynamicBMCNonDHCP. Static is the static mode, you can manually set the IP address,

and DHCP is the dynamic mode. Setting this option allows BMC to automatically obtain an IP address from

the DHCP server.