SNR RDC-48-540-STD [2/15] I general
![SNR RDC-48-540-STD [2/15] I general](/views2/1978797/page2/bg2.png)
Page 2 of 15
I. General
This m
odel of power supply is systemic one which features wide input voltage range, output voltage
54.5V, max output current 5A for single rectified module, and floating charge for battery. System has two
rectified modules which are integrated, and then output. Output voltage refers to voltage after integration.
There is a monitoring module that communicates with supervisory control computer by RS232 to monitor
power supply and battery.
II. Main Specifications
Max Output
Current
Output Power
Input Voltage
Range
Output Rated
Voltage
Min Output
Current
Forced Cooling
Output Ripple & Noise
(Full load,frequency
band is limited to
20MHz)
540W(typical
value,air cooling)
90-264Vac +54.0V 0A 10A ≤200mVp-p
III. Quoted Standards
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:Test methods—Tests
A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods—Tests
B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products Test Ca:
Damp heat, steady state
GB/T 2423.4.1993 Basic environmental testing procedures for electric and electronic products Test Db:
Damp heat, cyclic
GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods —Tests
Ea and guidance:Shock
GB/T 2423.6-1995 Environmental testing for electric and electronic products—Part 2:Test methods —Tests
Ea and guidance:Bump
GB/T 2423.8-1995 Environmental testing for electric and electronic products—Part 2:Test methods —Tests
Ed and guidance:Free drop
GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods
—Tests Fc and guidance:Vibration(Sinusoidal)
GB/T 2423.11-1997 Environmental testing for electric and electronic products—Part 2:Test methods
—Tests Fd and guidance:Random vibration wide band—General requirements
GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods
—Tests N:Change of temperature
Содержание
- Contents 1
- I general 2
- Ii main specifications 2
- Iii quoted standards 2
- Iv environmental conditions 3
- Input characteristics 4
- Output characteristics 4
- V electrical characteristics 4
- Battery management characteristics 5
- Vi other requirements 6
- Vii safety emc 6
- Viii alert monitor interface 7
- Ix environmental testing requirements 8
- X mechanical characteristics 8
- Input port definition 10
- Output port definition 10
- 2 monitoring interface 12
- A1 a10 54v is the positive terminal of the 54v dc input 12
- A11 empty 12
- B1 b7 b11 empty 12
- B2 b6 54v is the positive terminal of the 54v dc input 12
- C1 state1 is the collector input of opt on for the rectification module 1 high resistant when the module 12
- C2 c6 empty 12
- C7 c11 gnd is the negative terminal of the dc 54v input 12
- D1 acstate is the emitter input of the warning opt for ac power shut down it should be high 12
- D10 d11 gnd is the negative terminal of 54v dc input 12
- D2 d3 empty 12
- D4 clonx is the ttl electric level output for battery current limitation value control high electric level 12
- D5 vdd is the 5v voltage output 12
- D6 batfuse is the ttl electric level input for battery fuse burn warning high electric level for warning 12
- D7 empty 12
- D8 load1fuse is the 23v input for no 1 circuit load fuse burn warning 23v for warning status and low 12
- D9 load2fuse is the 23v input for no 2 circuit load fuse burn warning 23v for warning status and low 12
- E1 clistate2 is the collector input of overload opt for rectification module 2 high resistance for 12
- E2 alm1 is the collector input of output warning opt of rectification module 1 high resistance for 12
- E3 clistate1 is the collector input of overload opt for rectification module 1 high resistance for 12
- E4 state2 is the collector input of opt on for the rectification module 2 high resistant when the module 12
- Electric level for normal operation 12
- Is disconnected while low electric level when connected 12
- Overload status and low electric level for normal operation 12
- Page 12 of 15 12
- Resistance in warning status and should be high electric level in normal operation 12
- Status and low electric level for normal operation 12
- Warning status and low electric level for normal operation 12
- Would change it default value while low electric level keep it remain the same 12
- Xi package transportation and storage 14
- Xii reliability requirements 15
- Xiii attentions 15
Похожие устройства
- SNR UPS-ONRT-25-INTXL33 Паспорт
- SNR UPS-ONRT-25-INTXL33 Инструкция
- SNR UPS-ONRM-2000-X72 Паспорт
- SNR UPS-ONRM-2000-X72 Инструкция
- SNR UPS-ONRT-15-INTXL33 Паспорт
- SNR UPS-ONRT-15-INTXL33 Руководство пользователя
- SNR UPS-ONT-10000-INT Паспорт
- SNR UPS-ONT-10000-INT Руководство пользователя
- SNR UPS-ONT-020-BXL31 Паспорт
- SNR UPS-ONT-020-BXL31 Руководство пользователя
- SNR UPS-BCT-3000-B72 Паспорт
- SNR UPS-ONT-015-BXL31 Руководство пользователя
- SNR UPS-ONRM-2000-XL72 Паспорт
- SNR UPS-ONRM-2000-XL72 Руководство пользователя
- SNR UPS-ONT-6000-INTXL Паспорт
- SNR UPS-ONT-10000-INTXL Паспорт
- SNR UPS-ONT-010-BXL31 Руководство пользователя
- SNR UPS-ONPM-50SMX33 Паспорт
- SNR UPS-ONRT-090-15CMX33 Руководство пользователя
- SNR UPS-ONRT-040-10CMX33 Инструкция