Festool Rustofix RAS 180.03 E-HR 570775 [15/86] Caution
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Festool Rustofix RAS 180.03 E-HR 570775 [15/86] Caution

Festool Rustofix RAS 180.03 E-HR 570775 [15/86] Caution
15
Processed material
Working procedure
Electronics
setting
Brushing
stained parts (BG 85) 2 - 3
Constant speed
The preselected motor speed remains constant
through electronic control. This ensures a uniform
cutting speed even when under load.
Overload safety device
In extreme applications, the current consump-
tion may far exceed the permitted nominal value.
A "safety coupling" integrated in an electronic
overload safety device switches off the motor and
prevents it from burning out. Motor operation
resumes immediately after the load is relieved.
Temperature cut-out
To protect against overheating (burning out of mo-
tor), an electronic temperature monitoring system
has been installed. Prior to reaching a critical mo-
tor temperature, the safety electronics switches
off the motor. After a cooling time of approx. 3-5
minutes, the machine can be operated again at
full load. The machine requires less time to cool
down when idling.
LED indicator
The rotary sander is fitted with an electronic
adjusting wheel and a green and red LED [1-3].
A green lit LED indicates that the rotary sander
is operating in normal mode. A red lit LED indi-
cates that the motor is operating at approx. 70%
overload. The overload or temperature cut-out
switches off the motor if overloaded for longer
periods.
However, alternately fl ashing green and red LEDs
indicate that the brushes are completely worn
(remaining working hours max. 10 hours). In
this case, have an authorised after-sales service
workshop replace the carbon brushes the next
day. Always replace these brushes with special
carbon brushes available in pairs otherwise the
LED indicators will not work.
7.2 Changing the brushes
Loosen the screw [2-1]. f
Swivel the silver cover [2-2] down. f
Press and hold the spindle lock [2-3] and un- f
screw the hexagon nut (size 24) on the brush.
Insert a different brush. f
Tighten the hexagon nut to secure the brush f
and then close the silver cover.
For brushes LD 85 and BG 85, use the ac-
companying centring disc.
7.3 Adjusting the texture depth
Set the required texture depth using the thum- f
bwheel [1-6].
7.4 Dust extraction
CAUTION
Breathing in dust damages the respiratory
passage.
Always connect the machine to a dust ex- f
tractor.
When performing work that generates dust, f
always wear a dust mask.
You can connect a Festool extractor to the extrac-
tor connector [1-7]. The extractor hose in the
Festool extractor is 27 mm in diameter.
8 Working with the machine
The RUSTOFIX gives beams or wooden panelling
a rustic texture.
Working method
After the fi rst working procedure with the wire
brush LD 85, protruding fi bres give the wooden
surface a rough feel. In the second working pro-
cedure, plastic bristles KD 80 sand the textured
surface to lend a smooth fi nish.
fAlways guide the machine evenly and in the
direction of the grain.
fHold the machine with both hands to ensure
safe guidance.
fDo not overload the machine by pressing with
excessive force! The best results are achieved
with moderate application pressure.
fMaintain the speed specified. (see Chapter
7.1)
Use the correct brush for the relevant working
procedure:
Working proce-
dure
Brush
Texturing Rustilon brush LD 85
(standard wire brush)
Intermediate san-
ding
Rustilon brush KB 80
(plastic bristles)
Smoothing Rustilon brush BG 85 (si-
sal bristles)

Содержание

Похожие устройства

Скачать