![AMERICAN DJ Crazy Pocket 8 [7/16] Pan inversion](/img/pdf.png)
AMERICAN DJ Crazy Pocket 8 [7/16] Pan inversion
![AMERICAN DJ Crazy Pocket 8 [7/16] Pan inversion](/views2/1989851/page7/bg7.png)
ADJ Products, LLC - www.adj.com - Crazy Pocket 8 User Manual Page 12 ADJ Products, LLC - www.adj.com - Crazy Pocket 8 User Manual Page 13
DNST - This mode can be used as a precaution mode,
that in case the DMX signal is lost, interrupted, or power is
lost, the operating mode chosen in the setup is the running
mode the xture will go into when the DMX signal is lost. You
can also set this as the operating mode you would like the
unit to return to when power is applied.
1. Press the MENU button until “DNST” is displayed, and either
“MASL”, “BLND”, or “LAST” will be displayed beneath.
2. Press ENTER and the bottom choice will begin to ash. Use the UP
or DOWN buttons to choose an operating mode you would like the unit
to start up in when power is applied or the DMX signal is lost.
• LAST - If the DMX signal is lost the xture will stay in the last DMX
setting. If power is applied and this mode is set, the unit will automati-
cally go into the last DMX set up.
• MASL (Master Slave) - If the DMX signal is lost or power is applied,
the unit will automatically go into Master Slave mode and run a built-in
show.
• BLND (Blackout) - If the DMX signal is lost or interrupted, the unit will
automatically go into stand by mode.
3. Press ENTER to conrm your desired set up.
PAN - Pan Inversion
1. Press the MENU button until “PAN” is displayed, press ENTER.
Either “Yes” or “No” will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons until
“Yes” is displayed, press ENTER to conm. To deactivate Pan inver-
sion, select “No” and press Enter.
TIL 1 - Tilt Inversion for Bar 1 (Top Bar)
1. Press the MENU button until “TIL 1” is displayed, press
ENTER. Either “Yes” or “No” will be displayed.
Crazy Pocket 8 System Menu
2. To activate the tilt inversion press the UP or DOWN buttons
until “Yes” is displayed, press ENTER to conm. To deactivate
tilt inversion, select “No” and press Enter.
TIL 2 - Tilt Inversion for Bar 2 (Bottom Bar)
1. Press the MENU button until “TIL 1” is displayed, press
ENTER. Either “Yes” or “No” will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons
until “Yes” is displayed, press ENTER to conm. To deactivate
tilt inversion, select “No” and press Enter.
LED - With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “LED” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at all
times, or “OFF” to switch to have the LED display switch o after 10
seconds.
DISP - This function will reverse the display 180º.
1. Press the MENU button until “DISP” is displayed, press ENTER.
2. Press ENTER to “ip” the display. Press ENTER to “ip” it again.
Press ENTER when you have made your desired setup.
TEST - This function will run a self test program.
1. Press the MENU button until “TEST” is displayed, press ENTER.
2. The xture will now run a self test.
FHRS - With this function you can display the running
time of the unit.
1. Press the MENU button until “FHRS” is displayed, press ENTER.
Crazy Pocket 8 System Menu
Содержание
- Crazy pocket 8 1
- User instructions 1
- Caution 2
- Customer support 2
- Introduction 2
- Unpacking 2
- Warning 2
- Dmx 512 3
- Power supply 3
- A male and female xlr connector on either end of the cable also remember that dmx cable must be daisy chained and cannot be split 4
- Be sure to follow figures two and three when making your own cables do not use the ground lug on the xlr connector do not con nect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the xlr s outer casing grounding the shield could cause a short circuit and erratic behavior 4
- Conductor 5 pin xlr male in 3 pin xlr female out 4
- Crazy pocket 8 dimensions 4
- Crazy pocket 8 dmx set up 4
- Data compliment signal 4
- Data true signal 4
- Ground shield 4
- Not used 4
- Notice 4
- Pin 4 do not use 4
- Pin 5 do not use 4
- Pin xlr dmx connectors 4
- Pin xlr to 5 pin xlr conversion 4
- Some manufactures use 5 pin dmx 512 data cables for data transmission in place of 3 pin 5 pin dmx fixtures may be implemented in a 3 pin dmx line when inserting stan dard 5 pin data cables in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores the chart below details a proper cable conversion 4
- Special note line termination 4
- When longer runs of cable are used you may need to use a terminator on the last unit to avoid erratic behavior a terminator is a 110 120 ohm 1 4 watt resistor which is con nected between pins 2 and 3 of a male xlr connector data and data this unit is inserted in the female xlr connector of the last unit in your daisy chain to terminate the line using a cable terminator adj part number z dmx t will decrease the possibilities of erratic behavior 4
- Crazy pocket 8 rear layout functions 5
- Crazy pocket 8 system menu 5
- Dmx address setting 6
- In this mode you can adjust the sound sensitiv ity 6
- Show modes 1 4 factory programs show mode can run with or without sound active mode active 6
- Sound active mode 6
- System menu when making adjustments press enter to confirm your setup then press and hold the menu button for at least 3 seconds to exit without making any adjust ments press the menu button the display will lock after 30 seconds press the menu button for 3 seconds to unlock 6
- This will let select your desired dimmer curve 6
- This will let select your desired dmx channel mode 6
- This will let you set unit as a master or slave in a master slave configuration 6
- Pan inversion 7
- Press the menu button until til 1 is displayed press enter either yes or no will be displayed 7
- This function will reverse the display 180º 7
- This function will run a self test program 7
- This mode can be used as a precaution mode that in case the dmx signal is lost interrupted or power is lost the operating mode chosen in the setup is the running mode the fixture will go into when the dmx signal is lost you can also set this as the operating mode you would like the unit to return to when power is applied 7
- Tilt inversion for bar 1 top bar 7
- Tilt inversion for bar 2 bottom bar 7
- To activate the tilt inversion press the up or down buttons until yes is displayed press enter to confim to deactivate tilt inversion select no and press enter 7
- With this function you can display the running time of the unit 7
- With this function you can have the led display turn off after 10 seconds 7
- Adjustment of the pan home position 8
- Adjustment of the tilt home position for the 1 top bar 8
- Adjustment of the tilt home position for the 2 bottom bar 8
- Pan offse 8
- Press the menu button until rset is displayed press the enter button and the unit will reset itself 8
- The display will show the software version 8
- This function will reset the unit 8
- Tilt 1 offse 8
- Tilt 2 offse 8
- Use this function to display the software version of the unit 8
- For the master unit 9
- Master slave operation 9
- Operating modes 9
- Shnd is displayed and press enter 2 9
- Show mode 9
- Sound active mode 9
- The slave units 9
- Universal dmx control 9
- Channel value function 10
- Shows 0 7 blackout 8 69 show 1 70 131 show 2 132 193 show 3 194 247 show 4 248 255 show 0 10
- Fixture cleaning 14
- Adj products llc www adj com crazy pocket 8 user manual page 28 adj products llc www adj com crazy pocket 8 user manual page 29 15
- Crazy pocket 8 notes 15
- Crazy pocket 8 warranty 15
- A d j supply europe b v junostraat 2 6468 ew kerkrade the netherlands service adjgroup eu www adj eu tel 31 45 546 85 00 fax 31 45 546 85 99 16
- Adj products llc 6122 s eastern ave los angeles ca 90040 usa tel 323 582 2650 fax 323 725 6100 web www adj com e mail info americandj com 16
- Auto sensing voltage 16
- Model crazy pocket 8 16
- Please note 16
- Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 16
- This fixture contains a automatic volt age switch which will auto sense the voltage when it is plugged into the power source 16
Похожие устройства
- AMERICAN DJ Comscan LED System Руководство по эксплуатации
- AMERICAN DJ Bubble Tron Руководство по эксплуатации
- AMERICAN DJ Bubble Blast Руководство по эксплуатации
- AMERICAN DJ BOOM BOX FX3 Руководство по эксплуатации
- American Audio VLP300 Руководство по эксплуатации
- American Audio VLP2500 Руководство по эксплуатации
- AMERICAN DJ Quad Gem LED DMX Руководство по эксплуатации
- American Audio UCD-200 Руководство по эксплуатации
- American Audio PXW 18P Руководство по эксплуатации
- American Audio PXW 15P Руководство по эксплуатации
- American Audio Flex100 MP3 Руководство по эксплуатации
- American Audio Encore 1000 Руководство по эксплуатации
- American Audio DLT-15A Руководство по эксплуатации
- AMC VIVA 8 W new Руководство по эксплуатации
- AMC VIVA 4IP (RAL 9017) Руководство по эксплуатации
- AMC VIVA 4IP (RAL 9016) Руководство по эксплуатации
- AMC VIVA 4 (RAL 9017) Руководство по эксплуатации
- AMC VIVA 4 (RAL 9016) Руководство по эксплуатации
- AMC SP 10EN new Руководство по эксплуатации
- AMC PCR 8T Руководство по эксплуатации