AMERICAN DJ Comscan LED System [7/10] Universal dmx control

American DJ® - www.americandj.com - Comscan LED Instruction Manual Page 13 American DJ® - www.americandj.com - Comscan LED Instruction Manual Page 14

Operating Modes: The Comscan LED can operate in three dif-

ferent modes. In each mode you can run the fixture as a stand

alone fixture or in a master/slave confiugration. This next section

will detail the differences in the operating modes.

• Sound Active mode -

The fixture will react to sound, chasing through the built-in programs.

• Show mode -

Choose 1 of 12 show modes to run.

• DMX control mode -

This function will allow you to control each individual fixtures traits

with a standard DMX-512 controller such as the Elation® Show

Designer.

™

Master-Slave Operation This function will allow you to link up to 16

units together and operate without a controller. The units will be sound

activated. In Master-Slave operation one unit will act as the controlling

unit and the others will react to the controlling units programs. Any unit

can act as a Master or as a Slave.

1. Using approved DMX data cables, daisy chain your units togeth-

er via the XLR connector on the rear of the units. Remember the

Male XLR connector is the input and the Female XLR connector

is the output. The rst unit in the chain (master) will use the female

XLR connector only - The last unit in the chain will use the male

XLR connector only. For longer cable runs we suggest a termina-

tor at the last fixture.

2. On the Master unit find your desired show and set that show by

pressiing the ENTER button.

3. On the slave units tap the MENU button until “SLMD” is dis-

played, and Press ENTER.

4. The slave units will now follow the Master unit.

Universal DMX Control: This function allows you to use a Elation®

universal DMX-512 controller to control the chases and patterns,

dimmer and strobe. A DMX controller allows you to create unique

programs tailored to your individual needs.

1. The Comscan LED is a five DMX channel DMX fixture. See

page 14 for a detailed description of the DMX values and traits.

2. To control your fixture in DMX mode, follow the set-up procedures

Comscan LED Operation Comscan LED Operation

on pages 5-7 as well as the set-up specifications that are includ-

ed with your DMX controller.

3. Use the controller’s faders to control the various DMX fixture traits.

4. This will allow you to create your own programs.

5. Follow the instructions on page 9 to set the DMX address.

6. For longer cable runs (more than a 100 feet) use a terminator on

the last fixture.

7. For help operating in DMX mode consult the manual included

with your DMX controller.

Sound Active Mode: This mode allows either single unit or several

units linked together, to run to the beat of the music.

1. Tap the MENU button until “SOUN” is displayed, and press

ENTER.

2. Press ENTER then press and hold MENU for 3 seconds to corm.

3. The optional UC3 Controller (not included) may be used to con-

trol different functions including blackout.

Show Mode: In this mode you can choose 1 of 12 show modes to

run.

1. Tap the MENU button until “SHND” is displayed, and press

ENTER.

2. Tap the UP or DOWN buttons until you nd your desired show,

and press ENTER then press and hold MENU for 3 seconds to

con rm. See page 9 for more info.

3. The optional UC3 Controller (not included) may be used to con-

trol different functions including blackout.

Comscan LED UC3 Control

Blackout Blackout the unit

Function

1. Synchronous Strobe

2. Two light Strobe

3. Sound Strobe

Show Select

(show0-12)

Gobo Select

(8+open)

Mode

Sound/Strobe

(LED OFF)

Chase

(LED ON)

Gobo

(LED blinking)

AMERICAN DJ Comscan LED System [7/10] Universal dmx control

Содержание

Похожие устройства