Involight NL410 [3/5] Dmx mode

select the programs ( ) and select the desired program value。

For example,

When it shows

, press “SETUP”button for the first time, it will show , you can set the LEDs

running speed of the program by“UP”and“DOWN” .

Press “SETUP”button for the second time, it will show

, then you can set the flash frequency for it by

“UP”and“DOWN”.

Press “SETUP”button for the third time, it will show , then you can set the motors running speed by

“UP”and“DOWN”.

Press “SETUP”for the fourth time, it will show , then you can set retention time for the motor after

running one step by “UP”and“DOWN”.

2. Auto run mode

You can press “MODE”button to select auto run mode, it shows

, then you can press “SETUP” button

for the first time, it shows , then you can set the running loops by “UP”and“DOWN”.

Press “SETUP”button for the second time, it will show

, you can set the LEDs running speed of the

programs by “UP”and“DOWN”.

Press “SETUP”button for the third time, it will show

, then you can set the flash frequency for LEDs by

“UP”and“DOWN”.

Press “SETUP”button for the fourth time, it will show

, then you can set the motors running speed by

“UP”and“DOWN”.

Press “SETUP”for the fifth time, it will show , then you can set retention time for the motor after running

one step by “UP”and“DOWN”.

3. DMX mode

You can control the devices individually via your DMX controller. Press “MODE”button, when it is , it

is in DMX mode, this means DMX address is 001, you can set the DMX address by “UP”and“DOWN”buttons.

DMX value as follows: