Al-Ko GTA 4030 Руководство по эксплуатации онлайн [24/112] 768761

Al-Ko GTA 4030 Руководство по эксплуатации онлайн [24/112] 768761
GB
24 GTA 4030
Installation and start-up
Take long breaks during your
working day so you can re-
cover from the noise and the
vibrations. Plan your work in
such a way that the use of ap-
pliances that generate strong
vibrations is spread over sev-
eral days.
If you notice an unpleasant
sensation or discolouration of
the skin on your hands when
using the appliance, stop work
immediately. Take sufficient
work breaks. Without suffi-
cient breaks, a hand/arm vi-
bration syndrome can occur.
Minimise your risk of being
exposed to vibrations. Main-
tain the appliance according
to the instructions in the oper-
ating instructions.
If the appliance is used fre-
quently, contact your dealer to
purchase anti-vibration ac-
cessories (e.g. handles).
Avoid working with the appli-
ance at temperatures below
10°C. Define how the vibra-
tion load can be limited in a
work plan.
3.7.3 Noise pollution
A certain level of noise exposure
from this appliance is inevitable.
Carry out noisy work at ap-
proved and specified time peri-
ods. Observe rest periods as ne-
cessary and restrict the duration
of the work to a minimum. For
your personal protection and
protection of persons in the vi-
cinity, appropriate hearing pro-
tection must be worn.
4 INSTALLATION AND START-UP
4.1 Installing the guard plate (02)
1. Insert the guard plate (02/01) onto the cutter
head (02/02) (02/a).
2. Screw in the fastening screws (02/03) to se-
cure the guard plate against falling down (02/
b).
4.2 Installing the hand grip
See "Multitool MT 40 – basic appliance" operat-
ing instructions.
4.3 Putting the attachment on the basic
appliance
See "Multitool MT 40 – basic appliance" operat-
ing instructions.
5 OPERATION
Switch on the machine before approaching the
grass to be cut. Thus, the cutting line reaches the
maximum speed of rotation.
5.1 Fold down the protective bracket(03)
1. Tilt the protective bracket (03/1) downwards
by hand (03/a) until it engages in the hori-
zontal position (03/b).
5.2 Switching the appliance on and off
See "Multitool MT 40 – basic appliance" operat-
ing instructions.
5.3 Prolonging the cutting line during
operation (04)
The cutting line shortens during operation and
frays out.
1. Tap (04/a) the spool head (04/1) on the
ground from time to time. This unwinds a
piece of new cutting line from the spool and
cuts off the used line end of the line cutter
(04/2).

Содержание

Скачать