![Roland Aerophone AE-10 [10/22] Menu settings](/img/pdf.png)
Roland Aerophone AE-10 [10/22] Menu settings
![Roland Aerophone AE-10 [10/22] Menu settings](/views2/2007986/page10/bga.png)
10
Menu Settings
Menu Value Default Explanation
BreatAdj
AUTO, 0–100 AUTO
Breath Threshold Adjustment
This lets you adjust the strength of breath at which sound starts being heard.
Typically, you’ll set this to “AUTO” so that the sensitivity is adjusted automatically
when the power is turned on.
If you want to adjust it manually, proceed as follows.
1. Set the value to 0.
The note continues sounding.
2. Gradually increase the value until the sound stops.
3. Blow into the mouthpiece, and adjust the value as desired to
specify when the sound starts.
Breath
force
BreatAdj
Level
S
Bite Adj
AUTO, 0–100 AUTO
Specifying the Basic State of the Bite Sensor (Reed Bite Strength)
This species the basic state for the strength with which you bite the reed.
Normally, you can specify “AUTO” so that the adjustment is automatic.
If you want to adjust this manually, proceed as follows.
1. Bite the mouthpiece (reed) with your normal playing strength.
2. While continuing to bite the mouthpiece, press the octave key
[+2] button. The strength at which you are biting the reed at
this time is specied as the basic state.
* You can also use the [
C
] [
A
] buttons to adjust the value of the setting.
S
BiteSens
AUTO, 0–100 AUTO
Specifying Sensitivity of the Bite Sensor (Reed Bite Strength)
Adjust the reed position at which the pitch eect specied by
“BiteCtrl” starts to take eect. Normally, you can specify
“AUTO” so that the adjustment is automatic.
If the bite sensor has too much eect, decrease the value.
If the eect is dicult to apply, increase the value.
S
MIDI Ch
1–16 1
MIDI Transmit Channel Settings (MIDI Transmit Ch)
This setting species the MIDI channel on which the unit will transmit.
This unit will receive all sixteen channels (1–16).
S
BreaOut1
OFF, CC.1–31,
CC.33–95, BEND,
AFT.T, TONE
CC.2
Breath MIDI output setting 1/2
Species the MIDI output that is controlled by the breath sensor.
About the values
OFF No output
CC.1 – 31,
CC.33 – 95
Control change
BEND Pitch bend
AFT.T Aftertouch
TONE
Control specied for each
tone
S
BreaOut2
OFF S
BiteOut1
BEND
Bite MIDI output setting 1/2
Species the MIDI output that is controlled by the bite sensor.
S
BiteOut2
OFF S
Backup
– –
Backing up user tones and system settings
Here’s how to back up user tones and system settings to your computer.
1. Using a USB cable, connect your computer to the USB COMPUTER port (p. 3).
2. Select “
Backup
” in the upper, and then press the [MENU] button.
A conrmation message appears.
3. To execute Backup, press the [
A
] (Y) button.
If you decide to cancel, press the [
C
] (N) button.
When you execute, the screen of the Aerophone indicates “WAIT,” and the BACKUP drive appears in the
screen of your computer.
4. Copy the AE10_BKUP.SVD le from the Aerophone/BACKUP folder of the BACKUP drive to your
computer.
5. Eject the BACKUP drive, and disconnect the USB cable.
* Don’t turn o the power while the display indicates “WAIT.”
6. When the display indicates “END,” turn the power o and then on again.
–
Bite the mouthpiece
(reed) with your normal
playing strength
Increasing the value increases
the range of eectiveness
Decreasing the value decreases
the range of eectiveness
No eect
Eect
Содержание
- Aerophone ae 10 1
- Contents 1
- Owner s manual 1
- Mouthpiece 2
- Octave keys 2
- Panel descriptions 2
- Performance keys 2
- Power switch 2
- Tone tone selection button 2
- Battery case 3
- Built in speakers 3
- Connecting your audio player 3
- Connecting your computer 3
- Connecting your equipment 3
- Connecting your monitor speakers or headphones 3
- Dc in jack 3
- Display section 3
- Input jack 3
- Panel descriptions 3
- Phones output jack 3
- Strap ring 3
- Thumb controller 3
- Thumb hook 3
- Usb computer port 3
- Water drain 3
- Embouchure 4
- Holding the aerophone 4
- Octave keys 4
- Playing harmonics overtones 4
- Playing saxophone tones 4
- Pressing the performance keys 4
- Thumb controller 4
- Using the thumb 4
- Instantly recalling a user tone 5
- Playing saxophone tones 5
- Playing various tones 5
- Selecting a saxophone tone 5
- Short cut 5
- Example changing the master tuning 6
- Making settings in the menu 6
- Menu settings 6
- Saving a tone 6
- 5 4 3 2 1 0 1 2 3 4 5 6 7
- Adjusting the breath sensitivity 7
- Adjusting the volume 7
- Changing the key transpose 7
- Changing the master tuning 7
- Chorus setting 7
- Menu list 7
- Menu settings 7
- Multi effect setting 7
- Octave shift setting 7
- Reverb setting 7
- Tone volume 7
- Bend range setting 8
- Hold setting 8
- Menu settings 8
- Octave key setting 8
- Pitch change sensitivity setting 8
- Pitch change setting down 8
- Pitch change setting up 8
- Speaker setting when using headphones 8
- Specifying the control of the bite sensor reed bite strength 8
- Thumb controller left right assignment setting 8
- Thumb controller left right range minimum maximum value settings 8
- Thumb controller toggle settings 8
- Thumb controller up down bend up down setting 8
- A confirmation message appears 9
- Add edit delete fingering 9
- For details on fingering in each mode refer to fingering chart at the end of this manual 9
- How to add or edit 9
- How to delete 9
- If you choose none that fingering does nothing 9
- If you decide to cancel the write press the c n button an added or disabled fingering is indicated by a dot in the lower right of the screen 9
- If you decide to cancel the write press the c n button the dot in the lower right of the screen disappears 9
- Key display setting 9
- Making the power automatically turn off after a time auto off 9
- Menu settings 9
- Press a performance key 9
- Press the menu button 9
- Select fingering in the upper and then press the menu button 9
- Switches the fingering mode 9
- The note name appears in the lower line an added or disabled fingering is indicated by a dot in the lower right of the screen 9
- The note name appears in the lower line if there is no corresponding note the lower line indicates none 9
- To execute the write press the a y button 9
- Use the c a buttons to change the note name 9
- Use the c a buttons to choose del 9
- User tone shortcut setting 9
- While fingering the desired key press the octave key 2 9
- A confirmation message appears 10
- Backing up user tones and system settings 10
- Bite midi output setting 1 2 10
- Bite the mouthpiece reed with your normal playing strength 10
- Blow into the mouthpiece and adjust the value as desired to specify when the sound starts 10
- Breath midi output setting 1 2 10
- Breath threshold adjustment 10
- Copy the ae10_bkup svd file from the aerophone backup folder of the backup drive to your computer 10
- Don t turn off the power while the display indicates wait 10
- Eject the backup drive and disconnect the usb cable 10
- Gradually increase the value until the sound stops 10
- If you decide to cancel press the c n button when you execute the screen of the aerophone indicates wait and the backup drive appears in the screen of your computer 10
- Menu settings 10
- Midi transmit channel settings midi transmit ch 10
- Select backup in the upper and then press the menu button 10
- Set the value to 0 the note continues sounding 10
- Specifying sensitivity of the bite sensor reed bite strength 10
- Specifying the basic state of the bite sensor reed bite strength 10
- To execute backup press the a y button 10
- Using a usb cable connect your computer to the usb computer port p 3 10
- When the display indicates end turn the power off and then on again 10
- While continuing to bite the mouthpiece press the octave key 2 button the strength at which you are biting the reed at this time is specified as the basic state 10
- You can also use the c a buttons to adjust the value of the setting 10
- Clearing the user tones 11
- Copy the backed up ae10_bkup svd file into the restore drive 11
- Eject the restore drive and disconnect the usb cable 11
- Menu settings 11
- Restoring user tones and system settings 11
- Returning to the factory settings factory reset 11
- Select fctreset in the upper and then press the menu button 11
- Select restore in the upper and then press the menu button 11
- Select user clr in the upper and then press the menu button 11
- To execute restore press the a y button 11
- To execute the factory reset press the a y button 11
- To execute the user clear press the a y button 11
- Using a usb cable connect your computer to the usb computer port p 3 11
- Version information 11
- When the display indicates end turn the power off and then on again 11
- Appendix 12
- Caution 12
- Important notes 12
- Main specifications 12
- Using the unit safely 12
- Warning 12
- Fingering char 13
- Oct key oct 1 13
- 運指表 13
- Fingering chart 運指表 14
- Playing harmonics overtones 14
- フラジオ奏法 14
- Fingering chart 運指表 15
- Fingering chart 運指表 16
- Fingering chart 運指表 17
- Recorder fingering 17
- リコーダー運指 17
- Electronic wind instrument fingering 18
- Fingering chart 運指表 18
- 電子吹奏楽器運指 18
- Fingering chart 運指表 19
- Trumpet fingering 19
- トランペット運指 19
- Fingering chart 運指表 20
- Fingering that lets you perform using only the left hand 20
- 左手のみで演奏できる運指 20
- Fingering chart 運指表 21
- Fingering that lets you perform using only the right hand 21
- 右手のみで演奏できる運指 21
- Effect flo 22
- Part 1 22
- Part 2 22
- Part 3 22
- Part 4 22
- エフェクトの流れ 22
Похожие устройства
- Native Instruments TRAKTOR KONTROL S2 MK3 Руководство по эксплуатации
- Roland FP-30 BK Руководство по эксплуатации
- Roland FP-10-BK Руководство по эксплуатации
- Native Instruments TRAKTOR KONTROL X1 MK2 Руководство по эксплуатации
- Native Instruments MASCHINE JAM Руководство по эксплуатации
- Native Instruments TRAKTOR KONTROL F1 Руководство по эксплуатации
- Native Instruments Komplete Kontrol A49 Руководство по эксплуатации
- RME OCTAMIC XTC Руководство по эксплуатации
- RME MADI Converter Руководство по эксплуатации
- RME OCTAMIC II Руководство по эксплуатации
- Roland DJ-202 Руководство по эксплуатации
- RME M-32 DA Руководство по эксплуатации
- RME M-32 AD Руководство по эксплуатации
- RME HDSPe MADI FX Руководство по эксплуатации
- Soundcraft Si Performer 2 Руководство по эксплуатации
- RME ADI-648 Руководство по эксплуатации
- RME HDSP 9652 Руководство по эксплуатации
- Native Instruments Komplete Kontrol A25 Руководство по эксплуатации
- RME ADI-6432 Руководство по эксплуатации
- RME ADI-2 Руководство по эксплуатации