LINE 6 StageSource L3m Руководство по эксплуатации онлайн [9/24] 777336

L3t Side PaneL

1. Input Jack – Connectmicrophonesorline-levelequipmenttothecombi(XLRor1/4-inch)inputs.The1/4-inchinputcanacceptunbalanced

(Tip-Sleeve)orbalanced(Tip-Ring-Sleeve)cables.Whenconnectinganacousticguitar,useChannel1.

2. Pad Switch – Iftheinputsourceisparticularlyloud,enablethe-20dBpadswitch.

3. Channel Gain – Controlstheinputlevelforeachchannel.TheLEDaboveeachknoblightsgreenwhenasignalispresentandmayashredifthe

input is clipped.

4. Stereo Link Switch – WhentheStereoLinkswitchissettoDualMono,eachofthetwochannelsretainsitsownsettings.Whenconnectinga

stereosourcetothetwoinputs,itcanbeconvenienttohaveasinglesetofcontrolsadjustbothsignalssimultaneously.PlacingthisswitchinStereo

LinkmodedisablesChannel1’scontrolsandallowsChannel2’scontrolstoaffectbothinputs.WhenusingasingleL3t,allstereosignalsaresummed

equallywellonacousticguitarorkeyboards.IfasecondL3torL3misconnectedviaL6LINK,modulationwillautomaticallybeheardinstereo.

7. Verb – Determinestheamountofbuilt-inhallreverbappliedtothechannel.ThereverbistakenfromtheStageScapeM20ddigitalmixer,andis

optimizedforlivesoundreinforcement.IfasecondL3tisconnectedviaL6LINK,reverbwillautomaticallybeheardinstereo.

8. Feedback Suppression – Feedback suppression works by continuously analyzing the audio signal, identifying frequencies that have the

characteristics of feedback (steady frequencies with few overtones, rising in amplitude), and then applying a narrow notch lter to remove the

offendingfrequency.Upto12independentfeedbackfrequenciescanberemovedwiththeL3t’sFeedbackSuppression.

 PresstheOnbuttontoenableordisableFeedbackSuppression.EachtimetheFeedbackSuppressionisturnedoff,allltersarereset.WhenFeedback

Suppressionisturnedbackon,analysisbeginsagainandiffeedbackisdetectedagain,theltersareturnedbackon.

 Thefeedbackanalyzercanbesettooneofthreemodes,dependingonhowaggressivelytheanalysiswillseekoutpotentialfeedbackfrequencies.Press

and hold the On button to select between aggressive (red), medium (amber), or mild (green).